Knock Out White™ Low Bleed - 7007

Product families

Other characteristics

Brand

Knock Out White

Color

White

Features

Excellent Brightness, Excellent Opacity, Fast Flashing, Fast Production Cycle, High Temperature Curing, Low Tack, Medium Viscosity; 7007 Knock Out Low Bleed White has a creamy viscosity and medium body, making the ink suitable for both auto and manual presses.; 7007 Knock Out Low Bleed White offers superior performance through fast production speeds, and its brightness and opacity.; Average bleed resistance; Very good opacity; Very good flash

Show in full

Application Method

Wipe

Compatible Substrates & Surfaces

Cotton, Textiles

Markets

Industrial

Clean Up

Any eco-friendly plastisol screen wash.

Additives

If modification is necessary, use 1% to 10% by weight of 1099 Low Bleed Curable Reducer.

Cure

Heat Cure

Product Type

Screen Printing Ink

Technology

Ready-to-Use Products

Spot Flashing

Knock Out White™ Low Bleed - 7007 will spot dry, with a very low after the flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not fused. Fusing the underprint white may cause inter-coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing should occur in the dryer.

Show in full

Packaging Type

Totes (IBC)

Ink Application

Knock Out White™ Low Bleed - 7007 should be used right from the container without any modifications.

Labeling Claims

Phthalates-free

Product Packaging

• 5 gallon containers
• 30 gallon containers
• 50 gallon containers

Application Methods

Wipe

Recommended Fabrics

• 100% Cotton
• 50/50 Cotton/Polyester blends
• Some polyesters

Storage of Ink Containers

65º to 90ºF; Avoid storage in direct sunlight Keep containers well sealed.