White All-Pro™ 901
White All-Pro™ - 901 Series Plastisol Ink is fast flashing, 2 part ink, specifically formulated for printing on normally hard to print Nylon.
Product families
- Textile Manufacturing
Other characteristics
- Brand
- White All-Pro
- Color
- White
- Features
Excellent Scuff Resistance, Fast Flashing, Good Scratch Resistance, High Temperature Curing, Peel Resistance; Being the industry standard for over 15 years, the ink's harder finish resists scratching, scuffing and peeling for an extremely durable image.; It can also be used without catalyst on nonwoven polyporpylene bags (NPB) by adding up to 6% 3804 Low Cure Additive, which reduces cure temperatures down to 250°F.; Average bleed resistance; Very good opacity; Very good flash
- Application Method
- Wipe
- Compatible Substrates & Surfaces
- Cotton, Plastics, Polyamide 6 (PA 6), Textiles
- Markets
- Industrial
- Clean Up
- Any environment friendly plastisol screen wash.
- Additives
If modification is necessary, use 1% to 5% by weight of 1110 Curable Reducer. For NPB, 3804 Low Cure Additive can be added up to 6% by weight to lower cure temperature.
- Conditions
Fusing at lower temperatures may require a longer dryer retention time. Metallic colors need longer dwell time.
- Cure
- Heat Cure
- Product Type
- 2K (2 Component) Ink
- Screen Printing Ink
- Technology
- Ready-to-Use Products
- Packaging Type
- Totes (IBC)
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Screen Mesh (Monofilament) | 86 - 305 | t/in | — |
| Emulsion (Direct/Indirect Emulsion, Capillary Film) | 35 - 70 | micron | — |
| Squeegee (Sharp Edge) | 70 - 80 | — | Durometer |
| Cure Temperature⁺ | 275 - 325 | °F | — |
