Cool White™ 7022
Cool White™ 7022 is a low bleed, fast flashing, low tack, flexible curing, non-phthalate plastisol screen printing ink. Cool White™ 7022 has a creamy viscosity with a great body, making the ink suitable for printing on auto and manual presses. Cool White offers superior performance over a wide range of substrates, including standard textiles along with hard to print promotional items.
Product families
Applications
- Textile Manufacturing
Product Families
- Screen Printing Inks
Other characteristics
- Brand
- Cool White
- Color
- Opaque, White
- Opaque
- White
- Features
Fast Flashing, High Performance, High Temperature Curing, Low Tack; As part of our new FlexCure™ line, Cool White's 'flexible' curing range of 275°F to 325°F makes it ideal for printing on a variety of substrates.; Cool White™ is low-bleed, low-tack and fast flashing.; The ink is easy to print, creamy, with a great body. It prints equally well on automatics as on manuals.; Cool White™ offers superior performance on a variety of substrates, including hard-to-print synthetic fabrics such as nylon bags, non-woven polypropylene, and polyester sheathing.; When using Cool White™, the resulting prints are soft and supple with great drape.; Very good bleed resistance; Excellent opacity; Excellent flash
- Application Method
- Wipe
- Compatible Substrates & Surfaces
- Cotton, Plastics, Polyamide 6 (PA 6), Textiles
- Markets
- Industrial
- Clean Up
- Any eco-friendly plastisol screen wash.
- Additives
If modification is necessary, add 196 to 10% by weight of 1099 Low Bleed Curable Reducer.
- Cure
- Heat Cure
- Spot Drying
Cool White™ 7022 will spot dry, with a very low after the flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not fused. Fusing the underprint white may cause inter-coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing will occur in the dryer.
- Product Type
- Screen Printing Ink
- Technology
- Ready-to-Use Products
- Packaging Type
- Totes (IBC)
- Ink Application
Cool White 7022 should be used right from the container without any modifications.
- Labeling Claims
- Phthalates-free
- Product Packaging
- Quart containers
- 1 gallon containers
- 5 gallon containers
- 30 gallon containers
- 50 gallon containers
- Application Methods
- Wipe
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Screen Mesh | 60 - 230 | t/in | — |
| Emulsion (Direct/Indirect Emulsion, Capillary Film) | 35 - 70 | micron | — |
| Squeegee (Sharp Edge) | 65 - 75 | — | Durometer |
| Cure Temperature (Longer Dryer Retention Time For Lower Temp Fusing) | 275 - 325 | °F | — |
