MG Chemicals 402A - Super Duster™ 134
- Chemical Name
- 1112-Tetrafluoroethane
The 402A Super Duster™ 134 is a pure, non-flammable duster that can be used on live electronic and electrical equipment. The duster contains pure 1,1,1,2-tetrafluoroethane (HFC 134a), which delivers a constant, high-pressure cleaning jet. The gas jet is dry, low-residue, and chemically inert, which makes it safe for cleaning electrical and electronic components. The 402A duster is ideal for removing lint, dust, and other debris from printed circuit boards, electronic devices, and computers. It helps prevent malfunctions and lengthens component life.
Properties
- Physical Form
- Gas
Product families
Applications
- Industrial Cleaning
- Institutional & Catering
Product Families
- Commercial Cleaners
- Industrial Cleaners
Other characteristics
- Features
- High Dust Control, Low Toxicity, Ozone Resistant
- Product Type
- High Pressure Cleaner
- Application Area
Appliances, Circuit Board Connectors, Electronic Components, Equipment; Appliances; Circuit Board Connectors; Electronic Components; Equipment
- Certifications & Compliance
- RoHS Compliant
- Odor
- Very slight, ether-like
- Markets
- HI&I Care
- Instructions
To remove safety tab; Firmly hold the head of the nozzle and trigger in place.; Pull tab forward on top of nozzle until it snaps off; To clean surfaces; Spray directly on dusty component using bursts of spray. Clean contaminations from top to bottom to avoid redeposit of dust on clean areas.; Use extension tube to direct the spray in hard to reach corners.; Tip !; Avoid continuous spray that causes component to reach freezing temperatures. In contact with moist air, cooled components could lead to unwanted frost formation. Avoid touching the component directly with your hands, nozzle, or extension straw.; Attention !; Holdcanuprightto avoid ejection of liquid stream during use. Do NOT spray when container is more than 45 degrees off vertical or inverted.
- Technology
- Ready-to-Use Products
- Benefit Claims
- Chemically Inert
- Key Attributes
Non-flammable—safe for use on energized circuits; Compatible with live electrical equipment and electronic components; Chemically inert; Moisture free; Ozone safe; Low toxicity; Attention :For energized electronic equipment use only.
- Labeling Claims
- Low Toxicity
- Non-Flammable
- Water-free
- Application Methods
- Spray
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Shelf Life Storage
Store at around room temperature. Use within -20 to 50 °C [-4 to 122 °F] and protect from direct heat or sunlight.
- Certifications and Compliance
- RoHS Compliant
- Ready to Use Product Features
- High Dust Control
- Low Toxicity
- Ozone Resistant
- Packaging and Supporting Products
- Packaging Weight
- 4.1 kg a)/ 9 lb
- a) Pack of 10
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Color | Colorless | — |
| Molecular Weight | 102 | g/mole |
| Boiling Point | -26.2 (-15.2) | °C (°F) |
| Density of Liquid (at 25 °C, 77 °F) | 1.21 | g/mL |
| Flash Point | None detected | — |
| Ozone Depleting Potential | 0 | — |
| GWP (100 y global warming potential) | 1430 | — |
| VOC (Volatile Organic Compound) | Exempt | — |
| Purity | min. 99.5 | % |
| Non-Volatile Residue | max. 0.01 | % |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Particulates/Solids | Visually clean | — |
| Non Absorbed Gases | 1.5 | % |
| Moisture Content | max. 10 | ppm |
| Acidity | max. 1 | ppm |
| Halides | max. 1 | ppm |
