MG Chemicals 8332 - Fast Set Epoxy
- Chemical Family
- Epoxy & Epoxy Derivatives
Fast Set Epoxy 8332 is a quick-set 2-part epoxy adhesive. Bonded parts need only be held together for eight to ten minutes before handling. It offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, woods, and most metals and plastics. This is a general-purpose adhesive suitable for household, industrial and manufacturing applications.
Product families
Applications
- Industrial Adhesives & Sealants
- Repair Adhesives
- Industrial Manufacturing
Product Families
- Other Adhesives & Sealants
Other characteristics
- Product Type
- 2K (2 component) Adhesive, Epoxy Adhesive
- 2K (2 component) Adhesive
- Epoxy Adhesive
- Compatible Substrates & Surfaces
- Ceramic, Concrete, Glass, Metal, Plastics
- Markets
- Adhesives & Sealants
- Industrial
- Shelf LIfe
- 3 Years
- Technology
- Ready-to-Use Products
- Key Attributes
Quick set time; Low shrinkage; Provides strong electrical insulation; Protects against thermal and mechanical shocks; Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons; Comes in convenient dual cartridges, suitable for automated dispensing applications
- Packaging Type
- Cartridges
- Cure
Allow to cure at room temperature for 5 hours, or cure the adhesive in an oven for 15 min at 65 ˚C.
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Storage and Handling
Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.
- Syringe or Cartridge
1. Twist and remove the cap from the cartridge or syringe. Do not discard cap.; 2. Dispense a small amount to ensure even flow of both parts.; 3. (Optional) Attach a static mixer.; Dispense and discard 3 to 5 mL of the product to; ensure a homogeneous mixture.4.After use, dispose of static mixer.; 4. Without a static mixer, dispense material on a mixing surface or container, and thoroughly mix parts A and B together.; 5. To stop the flow, pull back on the plunger.; 6. Clean nozzle to prevent contamination and material buildup.; 7. Replace the cap on the cartridge or syringe.
- Dispensing Accessories
Consult the table below for accessory selection. See the Dispensing Accessories Application Guide for usage instructions. 8MT-50-FT should only be used with a pneumatic dispenser.
- Certifications and Compliance
- ISO 9001
- RoHS Compliant
- Ready to Use Product Features
- Acid Resistant
- Electrically Insulating
- Excellent Humidity Resistance
- Excellent Solvent Resistance
- Excellent Substrate Adhesion
- Fast Setting
- General Purpose
- Low Shrinkage
- Compatible Substrates and Surfaces
- Ceramic
- Concrete
- Glass
- Metal
- Plastics
Technical data
Table 1 of 3
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Functional Cure (at 22 ˚C) | 5 | Hours |
| Mix Ratio | 1:1 | Volume |
| Mix Ratio | 1:1 | Weight |
| Set Time | 8 to 10 | Minutes |
| Viscosity (at 25 ˚C)ᴮ | 12 | Pa·s |
| Viscosity (at 25 ˚C)ᴬ | 14 | Pa·s |
| Working Time | 3 to 5 | Minutes |
Table 2 of 3
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Breakdown Voltage | 23200 | V |
| Compressive Strength | 63 | N/mm2 |
| CTE After Tg | 175 | ppm/˚C |
| CTE Prior Tg | 76 | ppm/˚C |
| Dielectric Strength | 250 | V/mil |
| Glass Transition Temperature (Tg) | 64 | ˚C |
| Hardness Shore D | 82 | — |
| Lap Shear (Aluminum) | 5.9 | N/mm2 |
| Lap Shear (Stainless steel) | 4.9 | N/mm2 |
| Resistivity | 1.7 x 10¹⁴ | Ω·cm |
| Service Temperature Range | -40 to 150 | ˚C |
| Tensile Strength | 34 | N/mm2 |
Table 3 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Mixed Density | 1.14 | g/mL |
