MG Chemicals 9310 - 1 Part Epoxy Adhesive
- Chemical Family
- Epoxides
9310 is a 1-part, fast curing, electrically insulative epoxy adhesive. It is a smooth, thixotropic paste that stays in place without tailing when dispensed. This surface mount adhesive is specially designed for die attach applications in electronics assembly operations. It can be readily used in manual, pneumatic and robotic dispensing processes. It can also be used as a general-purpose adhesive for household, industrial and manufacturing applications. It has an unlimited working life at room temperature and does not require mixing or frozen storage.
Properties
- Physical Form
- Paste
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Industrial Adhesives & Sealants
- Repair Adhesives
- Industrial Automation
- Industrial Manufacturing
- Adhesives & Sealants
- Semiconductor Manufacturing
Product Families
- Contact Adhesives
Other characteristics
- Cure Method
- Heat Cure
- Product Type
- 1K (1 component) Adhesive, Epoxy Adhesive
- 1K (1 component) Adhesive
- Epoxy Adhesive
- Application Area
- Die/Chip Attach
- Application Method
- Injection
- Markets
- Adhesives & Sealants
- Consumer Goods
- Electrical & Electronics
- Industrial
- Storage
Store between -10 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.
- Shelf LIfe
- 2 Years
- Cure
Heat Cure; The product will not cure at room temperature. Cure the adhesive in an oven at one of these time/ temperature options:
- Technology
- Ready-to-Use Products
- Key Attributes
Consistent dot profile; No mixing, unlimited working time at room temperature; Room temperature storage; Strong adhesion to a variety of substrates; Suitable for automated dispensing; Fast curing
- Packaging Type
- Cartridges
- Quality Standards
- IPC-CC-830B
- Application Methods
- Injection
- Recommended Preparation
Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues.; Syringe or Cartridge; For 10 mL size, twist and remove the cap from the syringe. Do not discard the cap.; For the 300 mL size, cut the end of the cartridge tip. Screw the tip on the cartridge. Insert the cartridge in a caulking gun.; Screw the tip on the cartridge.; Insert the cartridge in a caulking gun.; Dispense the adhesive evenly to both surfaces.; To stop the flow, pull back on the plunger.; Clean nozzle to prevent contamination and material buildup.; Replace the cap on the cartridge or syringe.; Dispensing Accessories; 9310-300ML cartridges are compatible with caulking guns that are readily available for purchase at local hardware stores.
- Certifications and Compliance
- California Proposition 65
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- UL 94
- Ready to Use Product Features
- Consistent Dot Profile
- Electrically Insulating
- Excellent Substrate Adhesion
- Fast Curing
- Thixotropic
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Density | 1.15 | g/mL |
Table 2 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Thermal Conductivity (at 25 ˚C) | 0.2 | W/(m·K) |
Table 3 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (at 25 ˚C) | 87 | Pa·s |
Table 4 of 4
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Breakdown Voltage | 41600 | V |
| Dielectric Strength | 220 | V/mil |
| Resistivity | 9.3 x 10¹² | Ω·cm |
| Hardness Shore D | 84 | — |
| Tensile Strength | 9.4 | N/mm2 |
| Compressive Strength | 103 | N/mm2 |
| Lap Shear (Stainless steel) | 8.5 | N/mm2 |
| Lap Shear (Aluminum) | 6.2 | N/mm2 |
| Glass Transition Temperature (Tg) | 113 | ˚C |
| CTE Prior Tg | 56 | ppm/˚C |
| CTE After Tg | 185 | ppm/˚C |
| Service Temperature Range | -55 to 140 | ˚C |
