MG Chemicals 9460TC - Thermally Conductive 1-Part Epoxy Adhesive
- Chemical Family
- Epoxides
9460TC is a 1-part, heat cured only, thermally conductive epoxy adhesive with an unlimited working time. It is an off-white, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This 1-part adhesive is used to glue heat sinks to LEDs, CPUs and other heat-generating components. It does not require mixing and is suitable for use with manual, pneumatic, and automatic dispensing systems.
Properties
- Physical Form
- Paste
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Electronics
- Displays
- Industrial Automation
- Adhesives & Sealants
- Semiconductor Manufacturing
Product Families
- Conductive Adhesives
Other characteristics
- Cure Method
- Heat Cure
- Product Type
- 1K (1 component) Adhesive, Epoxy Adhesive
- 1K (1 component) Adhesive
- Epoxy Adhesive
- Application Area
- LEDs, Semiconductors
- LEDs
- Semiconductors
- Application Method
- Injection
- Markets
- Consumer Goods
- Electrical & Electronics
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Key Attributes
High thermal conductivity; No mixing required prior to use; Provides strong electrical insulation; Low cure temperature (<100 °C); Room temperature storage; Bonds well to a wide variety of substances; Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
- Packaging Type
- Cartridges
- Quality Standards
- IPC-CC-830B
- Application Methods
- Injection
- Storage and Handling
Store below 30 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use
- Recommended Preparation
Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues.; Syringe
- Certifications and Compliance
- California Proposition 65
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- UL 94
- Ready to Use Product Features
- Alkali Resistant
- Bondability
- Conductive
- Electrically Conductive
- Electrically Insulating
- Excellent Humidity Resistance
- High Temperature Insulation Properties
- Salt Water/Spray Resistant
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Density | 1.64 | g/mL |
Table 2 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Thermal Conductivity (at 25 ˚C) | 0.8 | W/(m·K) |
Table 3 of 4
1 row| Characteristic | Value |
|---|---|
| Viscosity (at 25 ˚C) | Thixotropic paste |
Table 4 of 4
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Resistivity | 7.4 x 10¹⁶ | Ω·cm |
| Hardness Shore D | 86 | — |
| Tensile Strength | 9.1 | N/mm2 |
| Compressive Strength | 78 | N/mm2 |
| Lap Shear (Stainless steel) | 6 | N/mm2 |
| Lap Shear (Aluminum) | 3.2 | N/mm2 |
| Glass Transition Temperature (Tg) | 106 | ˚C |
| CTE Prior Tg | 36 | ppm/˚C |
| CTE After Tg | 72 | ppm/˚C |
| Service Temperature Range | -65 to 150 | ˚C |
| Intermittent Temperature | 215 | ˚C |
