MG Chemicals 9200 - Structural Epoxy Adhesive
- Chemical Family
- Epoxides
9200 is a toughened, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration-resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through. For a flame retardant version, use 9200FR.
Product families
- Encapsulants
- Structural Adhesives
Other characteristics
- Cure Method
- Air Dry, Heat Cure
- Product Type
2K (2 component) Adhesive, Encapsulant, Epoxy Adhesive, Potting Compound, Structural Adhesive; 2K (2 component) Adhesive; Encapsulant; Epoxy Adhesive; Potting Compound; Structural Adhesive
- Application Area
- Electrical Components, Universal Joints
- Electrical Components
- Universal Joints
- Application Method
- Injection
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Storage
Store between -10 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.
- Shelf LIfe
- 3 Years
- Cure
Air Dry; Heat Cure; Allow to cure at room temperature for 48 hours, or cure the adhesive in an oven at one of these time/temperature options:
- Technology
- Ready-to-Use Products
- Key Attributes
Excellent bond strength to a wide variety of substrates; Extreme resistance to vibration and temperature cycles; Superior tensile, compressive and lap shear strength; Excellent chemical resistance; Excellent electrical insulating characteristics; Low shrinkage; RoHS 3 compliant
- Packaging Type
- Cartridges
- Quality Standards
- IPC-CC-830B
- Application Methods
- Injection
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Thermal Conductivity (at 25 ˚C) | 0.3 | W/(m·K) |
Table 2 of 4
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (at 25 ˚C) | 295 | Pa·s |
| Viscosity (at 25 ˚C) | 170 | Pa·s |
Table 3 of 4
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Breakdown Voltage | 41500 | V |
| Dielectric Strength | 503 | V/mil |
| Resistivity | 2.5 x 10¹³ | Ω·cm |
| Hardness Shore D | 76 | — |
| Tensile Strength | 16 | N/mm2 |
| Compressive Strength | 64 | N/mm2 |
| Lap Shear (Stainless steel) | 20 | N/mm2 |
| Lap Shear (Aluminum) | 22 | N/mm2 |
| Glass Transition Temperature (Tg) | 44 | ˚C |
| CTE Prior Tg | 95 | ppm/˚C |
| CTE After Tg | 215 | ppm/˚C |
| Service Temperature Range | -40 to 150 | ˚C |
Table 4 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Mixed Density | 1.25 | g/mL |
