MG Chemicals 9510 - One-Part Epoxy Potting Compound
- Chemical Family
- Epoxy & Epoxy Derivatives
One-part Epoxy Potting Compound 9510 is a black, rigid, one-part epoxy potting compound. It is a heat cure epoxy that provides unlimited working time at room temperature and does not require frozen storage. Our 1-part epoxy resin provides exceptional chemical resistance against a wide variety of mild to harsh chemicals, including toluene, acetone and ethyl acetate. It also provides excellent electrical insulation and protects against static discharge, vibration, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Adhesives & Sealants
- Potting Compounds
- Printed Circuit Boards (PCBs)
Product Families
- Encapsulants
Other characteristics
- Cure Method
- Heat Cure
- Product Type
1K (1 component) Sealant, Encapsulant, Potting Compound; 1K (1 component) Sealant; Encapsulant; Potting Compound
- Compatible Substrates & Surfaces
- Ceramic, Composites, Glass, Metal, Plastics
- Markets
- Consumer Goods
- Electrical & Electronics
- Cure
Heat Cure; The product will not cure at room temperature. After letting sit for 3 minutes, cure the coating in an oven at one of these time/temperature options:
- Technology
- Ready-to-Use Products
- Packaging Type
- Cans
- Cartridges
- Labeling Claims
- Solvent-free
- Benefits and Features
Minimum cure temperature of 80 °C; Ready to dispense—no mixing is required; Low viscosity of 4 800 cP; Excellent chemical resistance; Excellent adhesion to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics; Extremely high tensile and compressive strength; Excellent electrical insulating characteristics; Extreme resistance to water and humidity; Solvent-free
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- IECSC (China)
- KECI (Korea)
- NCI (Vietnam)
- NZIoC (New Zealand)
- PICCS (Phillipines)
- Dispensing Accessories
Consult the table below for accessory selection. See the Dispensing Accessories Application Guide for usage instructions. 9510-300ML cartridges are compatible with caulking guns that are readily available for purchase at local hardware stores.
- Shelf Life Storage
Store between -40 and 22 ˚C in a dry area, away from sunlight (see SDS). Some of the components are sensitive to air. To maximize shelf life, always recap product firmly when not in use.
- Certifications and Compliance
- RoHS Compliant
- Ready to Use Product Features
- Anti-Static
- Chemical Resistant
- Electrically Insulating
- Excellent Dielectric Properties
- Excellent Humidity Resistance
- Excellent Salt Spray Resistance
- Excellent Substrate Adhesion
- Fungus Resistant
- Compatible Substrates and Surfaces
- Ceramic
- Composites
- Glass
- Metal
- Plastics
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Cure Times (at 120˚C) | 30 | minute |
| Cure Times (at 80˚C) | 3 | h |
| Cure Times (at 90˚C) | 1 | h |
| Working Time | Unlimited | — |
Table 2 of 3
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Breakdown Voltage | 36700 | V |
| Compressive Strength | 90 | N/mm2 |
| CTE (After Tg) | 217 | ppm/˚C |
| CTE (Prior Tg) | 74 | ppm/˚C |
| Dielectric Strength | 540 | V/mil |
| Glass Transition Temperature (Tg) | 70 | °C |
| Hardness D | 84 | — |
| Intermittent Temperature | 295 | ˚C |
| Lap Shear (Aluminum) | 5.8 | N/mm2 |
| Lap Shear (Stainless Steel) | 9.2 | N/mm2 |
| Resistivity | 2.6 x 10¹³ | Ω·cm |
| Service Temperature Range | -65 to 150 | ˚C |
Table 3 of 3
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 1.12 | g/mL |
| Viscosity (at 25˚C) | 4.8 | Pa·s |
