MG Chemicals 419E – Premium Acrylic Conformal Coating
- Chemical Family
- Acrylics & Acrylates
Premium Acrylic Conformal Coating 419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.
Product families
Applications
- Electronics Coatings
Product Families
- Protective Coatings
Other characteristics
- Features
Anti-Static, Corrosion Resistant, Durable, Ease of Handling, Excellent Dirt Pick-up Resistance, Excellent Salt Spray Resistance, Fast Cure, Flexible, Fungus Resistant, Good Smoothness, Moisture Barrier, Thermal Shock Resistant
- Product Type
- 1K (1 component) Coating, Conformal Coating
- 1K (1 component) Coating
- Conformal Coating
- Application Method
- Brush, Dip Coating, Spray
- Markets
- Electrical & Electronics
- Dip Coat
Use a Ford or Zahn cup to monitor the viscosity of the coating, as the solvent will evaporate over time.
- Certified
- UL 746E (File# E203094)
- IPC-CC-830C
- Shelf LIfe
- 5 years
- Technology
- Ready-to-Use Products
- Key Attributes
Xylene and toluene free; Fluoresces under UV-A light; Suitable for use with selective coating equipment; Clear, thin, flexible, and durable; Protects against dust, humidity, salt spray, corrosion, and chemical fogs; Protects against electrical arching, shorts, static discharges, and thermal shocks; Contains a UV indicator for optical inspection; Applied by brushing, dipping, manual and selective spraying; Available in liquid, aerosol, and pen; IPC and UL certified versions
- Packaging Type
- Cans
- Pails
- Labeling Claims
- HAPs-free
- Toluene-free
- Cure
Allow to dry at room temperature for 24 hours, or after letting sit for 10 minutes, cure the coating in an oven at one of these time/temperature options:
- Manual Spray Guns
Use a standard fluid nozzle gun with a minimum tip diameter of 0.8–1.0 mm. The settings listed below are recommendations; however, performance will vary with different brands:
- Selective Coating
For higher volume applications, coating can be applied via selective coating equipment. The settings listed below are recommendations and performance will vary with different brands.
- Application Methods
- Brush
- Dip Coating
- Spray
- Benefits and Features
Xylene and toluene free; Fluoresces under UV-A light; Suitable for use with selective coating equipment
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- INSQ (Mexico)
- KECI (Korea)
- NCI (Vietnam)
- Ready to Use Product Features
- Anti-Static
- Corrosion Resistant
- Durable
- Ease of Handling
- Excellent Dirt Pick-up Resistance
- Excellent Salt Spray Resistance
- Fast Cure
- Flexible
Technical data
Table 1 of 3
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Time to Handle (1 coats) | 15 | minute |
| Dry Time to Handle (2 coats) | 25 | minute |
| Minimum Recoat Time | 3 | minute |
| Recommended Film Thickness | 25-75 | μm |
| Theoretical Coverage (at 25 μm) | 93176 | cm2/L |
Table 2 of 3
8 rows| Characteristic | Value | Unit |
|---|---|---|
| CTE (Prior Tg) | 160 | ppm/˚C |
| Dielectric Strength | 1100 | V/mil |
| Dielectric Withstand Voltage | min. 1500 | V |
| Glass Transition Temperature (Tg) | 38 | °C |
| Insulation Resistance | 1 x 10¹² | Ω |
| Moisture Insulation Resistance | 1 x 10¹² | Ω |
| Resistivity | 3.5 x 10¹³ | Ω·cm |
| Service Temperature Range | -65 to 130 | ˚C |
Table 3 of 3
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Calculated VOC | 654 | g/L |
| Density | 0.92 | g/mL |
| Solid Content | 30 | % |
| Viscosity (at 25˚C) | 115 | cP |
