MG Chemicals 419D-P-BK - Overcoat Pen - Black
- Chemical Family
- Acrylics & Acrylates
419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.
Product families
Applications
- Electronics Coatings
- Printed Circuit Boards (PCBs)
Product Families
- Protective Coatings
Other characteristics
- Features
Anti-Static, Arc Resistant, Corrosion Resistant, Durable, Excellent Dirt Pick-up Resistance, Excellent Moisture Resistance, Fast Drying, Flexible, Fungus Resistant, Good Smoothness, Prevents Short Circuits, Prevents Static Discharges, Solder Resistance, Thermal Shock Resistant
- Product Type
- Conformal Coating
- Color
- Black
- Markets
- Electrical & Electronics
- Storage
Store between -5 and 40 ˚C in a in a dry area, away from sunlight .
- Shelf LIfe
- 5 Years
- Cure
- Air Dry
- Heat Cure
- Technology
- Ready-to-Use Products
- Key Attributes
Protects PCBs from solder drips; Prevents shorting and arcing; Protects electronics from moisture, corrosion, fungus, dirt, and static discharges; Comes in a variety of colors - blue, black, clear, green, and white; No hazardous air pollutants - free of toluene, xylene and MEK
- Labeling Claims
- Methyl Ethyl Ketone free
- Toluene-free
- Xylene-free
- Application Instructions
Shake pen vigorously until ball moves freely inside.; Hold pen at an angle and depress tip against surface.; Draw pen across surface while gently squeezing barrel.; Let dry 10 min before handling or heat cure.; Replace cap and store tip-up after use.; Recommended Preparation; Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues.; Cure Instructions; Allow to dry at room temperature for 24 hours, or after letting sit for 10 min, cure the coating in an oven for 1 h @ 65 ˚C.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Anti-Static
- Arc Resistant
- Corrosion Resistant
- Durable
- Excellent Dirt Pick-up Resistance
- Excellent Moisture Resistance
- Fast Drying
- Flexible
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Density | 0.92 | g/mL |
Table 2 of 4
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (at 25 ˚C) | 100 | cP |
| Calculated VOC | 654 | g/L |
Table 3 of 4
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Resistivity | 4.6 x 10¹⁴ | Ω·cm |
| Dielectric Strength | 1 000 | V/mil |
| Dielectric Withstand Voltage | min. 1500 | V |
| Insulation Resistance | 1 x 10¹³ | Ω |
| Moisture Insulation Resistance | 1 x 10¹² | Ω |
| Dielectric Constant (at 1 MHz) | 2.85 | — |
| Dissipation Factor (at 1 MHz) | 0.004 | — |
| Glass Transition Temperature (Tg) | 27 | ˚C |
| CTE Prior Tg | 72 | ppm/˚C |
| Service Temperature Range | -65 to 125 | ˚C |
Table 4 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Percent Solids | 30 | % |
