MG Chemicals 8361A-P - Label and Adhesive Remover Pen

8361A-P label and adhesive remover pen applies a solvent that soaks through labels to dissolve the adhesive backing, releasing the label. It can then be used to quickly clean up adhesive residues left behind. It can also be used to remove some inks and cured adhesives.

Properties

Physical Form: Liquid

Product families

Applications

HI&I Care — Institutional & Industrial Care

Industrial Cleaning

Product Families

Ready-to-Use Products — Cleaners

Commercial Cleaners
Industrial Cleaners

Other characteristics

Product Type: Cleaner
Certifications & Compliance: RoHS Compliant
Odor: Citrus
Markets: HI&I Care
Shelf LIfe: 5 Years
Technology: Ready-to-Use Products
Compatibility: The 8361A-P is compatible with most substrate materials found on printed circuit assemblies. User should always test on a small area prior full application.. 8361A-P Chemical Compatibility
Key Attributes: Removes labels adhesives without scraping; Safe on most plastics and paints; Pleasant citrus odor; Convenient pen format; Also available in aerosol format (Cat No. 8361-140G); RoHS Compliant; CARB Category and Limits: Adhesive Remover 20%
Application Instructions: For best results, follow the procedure below.; To clean residues with liquid pen:; 1. Shake pen vigorously. 2. Hold pen at angle and depress tip against surface. 3. Gently squeeze barrel onto the surface. 4. Allow solvent to penetrate. 5. Replace cap and store tip up after use.; ATTENTION! Always do a substrate compatibility test on a non-critical area or test sample prior to usage.
Certifications and Compliance: RoHS Compliant

Technical data

Table 1 of 2

6 rows

Characteristic	Value	Unit
Boiling Point	max. 178 (max. 352)	°C (°F)
Color	Colorless	—
Density (at 25 °C, 77 °F)	0.82	g/mL
Flash Point	48 (118)	°C (°F)
Vapor Pressure (at 20 °C, 68 °F)	2 (3)	hPa (mmHg)
Viscosity (at 40 °C, 104 °F)	max. 20.5	mm2/s

Table 2 of 2

1 row

Characteristic	Value	Unit
Storage Temperature Limits	-5 and 40 (23 and 104)	°C (°F)