KRYLEX® KU3064
- Chemical Family
- Acrylics & Acrylates
KRYLEX® KU3064 is a revolutionary odorless light curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixture, filet cure or surface cure. The UV / visible light cure properties facilitate rapid curing of exposed surface areas while the moisture curing properties of the product allow for secondary curing in shadowed areas.
Product families
- Other Adhesives & Sealants
Other characteristics
- Brand
- KRYLEX
- Cure Method
- Moisture Cure, Radiation Cure
- Product Type
- Radiation Curable Adhesive
- Markets
- Adhesives & Sealants
- Storage
Store in original containers at temperatures between 2 - 8 °C out of direct sunlight and away from sources of heat. Storage below 2 °C or greater than 8 °C can adversely affect product properties and shelf life.
- Used In
This product is not recommended for use in pure oxygen and / or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
- Appearance
- Transparent Yellow
- Cure
- Moisture Cure
- Radiation Cure
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Chemical Type
- Methoxyethyl Cyanoacrylat with photoinitiators
- Cured Performance
Tensile Shear Strength ISO 4587 (N/mm2 ) The shear strength will depend on the substrate.The table below shows the shear strength for different substrates using lap shears; * Substrate failure; Tack Free Time Tack Free Time is the time in seconds required to achieve a tack free surface when the product is cured by means of irradiation.; Fixture Times (Without light cure) Fixture time is the time at which an adhesive bond (250 mm2 ) is capable of supporting a 3 kg load for 10 seconds. The fixture time will depend on the substrate. The table below shows the fixture time for different substrates using lap shears. All fixture time measurements relate to moisture cured adhesive at room temperature, with no irradiation.
- Use Instructions
This product is light sensitive; exposure to daylight, UV light and artificial light should be kept to a minimum during storage and handling. KU3064 performs best with minimal gaps between substrates. KU3064 may be used as a regular instant adhesive without light curing. 1) Ensure parts are clean, dry and free from oil and grease. 2) Apply adhesive to one of the surfaces. Do not use items like tissue or a brush to spread the adhesive. 3) Hold or clamp parts together firmly until handling strength is achieved. KU3064 may also be used as a light sensitive instant adhesive. Repeat steps 1) - 3 ) then expose to a source of UV or blue light to cure: Squeezed material from the bondline, an external filet or the actual joint (only for transparent substrates). Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions).
- Shelf LIfe
- 12 Months
- Ready to Use Product Features
- Odorless
- Rapid Curing Speed
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Cure System | Moisture/UV/ Blue Light | — |
| Viscosity | 2021-10-30 | CPs |
| Specific Gravity | 1.13 | — |
| Gap Fill | 0.05 | mm |
| Max. Operating Temperature | -40 - 80 | °C |
