LEXAN™ FR Resin DSL1120

Chemical Family: Polycarbonate (PC)

LEXAN DSL1120 compound is based on Polycarbonate (PC) resin containing 20% glass bead. Added features of this grade include: Flame Retardant.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics
Polycarbonates

Other characteristics

Brand: LEXAN™ FR Resin
Polymer Name: Polycarbonate (PC)
Fillers Included: Glass Bead, Glass Fiber
Glass Bead
Glass Fiber
Additives Included: Flame Retardant, Heat Stabilizer, Mold Release Agent; Flame Retardant; Heat Stabilizer; Mold Release Agent
Processing Methods: Injection Molding
Note: ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 V0
UL 94 V1
Technology: Plastics
Material Features: Dimensional Stability
Flame Retardant
Good Mold Release
Heat Stabilized
Low Warpage
UL Listed
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Building Materials
Cell Phones
Computer Components
Consumer Applications
Containers
Displays
Doors
Electrical Components
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

2 rows

Characteristic	Value	Unit	Method
Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹	2732	MPa	ASTM D790
Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹	88	MPa	ASTM D790

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	9.6	g/10 min	ASTM D1238

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	133	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	80	°C	UL 746B

Table 4 of 6