Vibra-Tite® PB405 Structural Adhesive

Product families

Other characteristics

Brand

Vibra-Tite

Cure Method

Air Dry

Product Type

• 2K (2 component) Adhesive, Structural Adhesive
• 2K (2 component) Adhesive
• Structural Adhesive

Compatible Substrates & Surfaces

Aluminum, Coated Surfaces, Composites, Fiberglass, Metal, Plastics, Stainless Steel, Steel

Markets

Adhesives & Sealants

Features

• No surface prep
• Excellent Strength
• Impact Resistant
• 100% Reactive
• Room Temperature Cure
• Easily Applied

Cure

Air Dry

Precaution

Vibra-Tite PB405 is flammable. Keep away from heat, spark, and open flames. KEEP OUT OF REACH OF CHILDREN. THE PRODUCT IS FOR INDUSTRIAL USE ONLY. Keep containers closed when not in use. Avoid contact with skin and eyes. Harmful if swallowed. Refer to Material Safety Data Sheet for complete safety information.. Vibra-Tite PB420 is flammable. Keep away from heat, spark, and open flames. KEEP OUT OF REACH OF CHILDREN. THE PRODUCT IS FOR INDUSTRIAL USE ONLY. Keep containers closed when not in use. Avoid contact with skin and eyes. Harmful if swallowed. Refer to Material Safety Data Sheet for complete safety information.

Show in full

Applications

Adhesives & Sealants — Other Adhesives & Sealants Applications

Technology

Ready-to-Use Products

Shelf Life Storage

The shelf life of the Vibra-Tite PB405 is 12 months from date of shipment. Shelf life is based on the products being stored properly at temperatures between 55 °F and 75 °F. Exposure to temperatures above 75 °F will reduce the shelf life of these materials. These products should NEVER BE FROZEN.. The shelf life of the Vibra-Tite PB420 is 12 months from date of shipment. Shelf life is based on the products being stored properly at temperatures between 55 °F and 75 °F. Exposure to temperatures above 75 °F will reduce the shelf life of these materials. These products should NEVER BE FROZEN.

Show in full

Ready to Use Product Features

• Fast Cure
• Fast Setting
• Good Bonding Strength
• Good Weather Fastness
• High Elasticity
• Impact Resistance

Compatible Substrates and Surfaces

• Aluminum
• Coated Surfaces
• Composites
• Fiberglass
• Metal
• Plastics
• Stainless Steel
• Steel

Application Guidelines

The product is best used at temperatures between 65 °F and 80 °F. Temperatures below 65 °F will slow the cure speed of the material and viscosities will be higher. Temperatures above 80 °F will cause the material to cure faster and viscosities will be lower. For consistent dispensing maintain the temperature in the above-mentioned range.; For optimum bond strength and to ensure maximum performance in the finished assembly, join parts together within the specified work time of the adhesive. Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product. To ensure maximum performance in the finished assembly parts should remain undisturbed until the fixture time is reached.; Clean-up is best before the adhesive has cured. Cleaners containing acetone or Citrus terpene provide the best results. On cured adhesive repeat use may be required.

Show in full