Vibra-Tite® Multi Cure 240
- Chemical Family
- Acrylics & Acrylates
Vibra-Tite® Multi Cure 240 is an activated acrylic adhesive designed for fast fixturing on metal and magnet materials and a no mix system. The Product is developed to be used with Activator 600 or 638.
Product families
- Structural Adhesives
Other characteristics
- Brand
- Vibra-Tite
- Product Type
- Structural Adhesive
- Compatible Substrates & Surfaces
- Coated Surfaces, Metal
- Markets
- Adhesives & Sealants
- Storage
The product should be stored in a cool and dry location at temperatures between -10 ºC to 30 ºC. Optimal storage is 22±4ºC. Shelf life is 18 months from the date of manufacture when stored at 22±4ºC.
- Appearance
- clear/amber
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Chemical Type
- Acrylic
- Typical Applications
Vibra-TITE 240 may be used in applications that require very fast assembly. This adhesive is designed for DC motor assembly, magnet bonding and bonding of pre-coated sheet metal. Automated assembly lines with short cycle times will benefit from the rapid cure of 240. The product has the capability to produce tough, durable bonds with outstanding impact and peel resistance.
- Ready to Use Product Features
- Fast Cure
- Fast Setting
- Impact Resistance
- Peel Resistance
- Compatible Substrates and Surfaces
- Coated Surfaces
- Metal
- Environmental and Fluid Resistance
Tests were conducted on Grit blasted Steel Lap Shears exposed to the following conditions after a 24hr room temperature cure. One lap shear was coated with Activator 600 or 638. (Shear strength values)
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Toxicity | Low | — |
| Viscosity 25°C, (Brookfield RVT, Spindle 6 20 rpm) Spindle TA 2.5 rpm | 20,000-80,000 | cps |
| Viscosity 25°C, (Brookfield RVT, Spindle 6 20 rpm) Spindle TA 20 rpm | 6,500-17,000 | cps |
| Specific Gravity | 1.16 | — |
| Fixture Time ( 72°F) | 30.0 | seconds |
| Full Cure Time (72°F) | 24.0 | hours |
| Temperature Range | -60 to 212 | °F |
| 24 hr Grit blasted Steel Lap Shear | 12.0 | Nmm² |
| 72 hr Grit blasted Steel Lap Shear | min. 12 | Nmm² |
