Vibra-Tite® PB305 Structural Adhesive
- Chemical Family
- Methacrylates
Vibra-Tite® PB305 Structural Adhesive is a fast setting, high performance two part methacrylate adhesive engineered to bond a wide range of materials including metal and plastics, especially fiberglass. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. Vibra-Tite® PB305 greatly increases the reliability of finished assemblies with exceptional flexibility, its ability to with stand extreme temperature fluctuation and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.
Product families
- Structural Adhesives
Other characteristics
- Brand
- Vibra-Tite
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive, Structural Adhesive
- 2K (2 component) Adhesive
- Structural Adhesive
- Compatible Substrates & Surfaces
Aluminum, Ceramic, Coated Surfaces, Fiberglass, Metal, Plastics, Stainless Steel, Steel
- Markets
- Adhesives & Sealants
- Features
- No surface prep
- Excellent Strength
- Impact Resistant
- 100% Reactive
- Room Temperature Cure
- Easily Applied
- Cure
- Air Dry
- Precaution
Vibra-Tite PB305 is flammable. Keep away from heat, spark, and open flames. KEEP OUT OF REACH OF CHILDREN. THE PRODUCT IS FOR INDUSTRIAL USE ONLY. Keep containers closed when not in use. Avoid contact with skin and eyes. Harmful if swallowed. Refer to Material Safety Data Sheet for complete safety information.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Shelf Life Storage
The shelf life of the Vibra-Tite PB305 is 9 months from date of shipment. Shelf life is based on the products being stored properly at temperatures between 55 °F and 75 °F. Exposure to temperatures above 75 °F will reduce the shelf life of these materials. These products should NEVER BE FROZEN.
- Ready to Use Product Features
- Chemical Resistant
- Durable
- Fast Cure
- Fast Setting
- Good Bonding Strength
- Good Weather Fastness
- High Flexibility
- Impact Resistance
- Compatible Substrates and Surfaces
- Aluminum
- Ceramic
- Coated Surfaces
- Fiberglass
- Metal
- Plastics
- Stainless Steel
- Steel
- Application Guidelines
The product is best used at temperatures between 65 °F and 80 °F. Temperatures below 65 °F will slow the cure speed of the material and viscosities will be higher. Temperatures above 80 °F will cause the material to cure faster and viscosities will be lower. For consistent dispensing maintain temperature in the above mentioned range.; For optimum bond strength and to insure maximum performance in the finished assembly, join parts together within the specified work time of the adhesive. Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product. To ensure maximum performance in the finished assembly parts should remain undisturbed until the fixture time is reached.; Clean up is best before the adhesive has cured. Cleaners containing acetone or Citrus terpene provide the best results. On cured adhesive repeat use may be required.
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity ( 25°C Resin) | 80000.0 | cps |
| Viscosity ( 25°C Activator) | . 80,000-120,000 | cps |
| Mixed Density | 8.6 | — |
| Mix Ratio: By Volume | I to 1 | — |
| Mix Ratio: By Weight | I to 1 | — |
| Thixotropic Index | 2022-04-05 | — |
| Flash Point | 51.0 | °F |
| Shear Strength | 1750-2800 | psi |
| Tensile Strength | - 2500-3500 | psi |
| Work Time | 2022-02-03 | minutes |
| Handling Strength | 2022-04-06 | minutes |
| Gap Fill | 0.25 | inches |
