3B Fibreglass M8610
- Chemical Family
- Glass Beads & Fibers
3B Fiberglass M8610 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.
Properties
- Physical Form
- Fabric
Product families
Applications
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
- Structural Components
- Pavement Highways Roads & Bridges
- Housings & Enclosures
Product Families
- Glass Fiber
Other characteristics
- Features
Good Mechanical Properties, Improved Mechanical Properties
- Processing Methods
Compression Molding, Reinforced Reaction Injection Molding (RRIM), Resin Film Infusion (RFI)
- Reinforcement Form
- Continuous Filament Mat (CFM), Woven Fabric
- Continuous Filament Mat (CFM)
- Woven Fabric
- Reinforcement Material
- Glass Fibers
- Compatible Polymers & Resins
Epoxies (EP), Polyesters, Polyurethanes (PU), Vinyl Esters
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Storage
Storage in a cool and dry warehouse into the original packaging is formally recommended. More precisely ideal storage conditions are a temperature between 15°C and 35°C and a relative humidity comprised between 35% and 75%. If these conditions are maintained, the glass _x001f_ bre product should not undergo signi_x001f_ cant changes when stored for extended periods of time. It is also strongly recommended to condition it in the workshop for at least 24 hours before use to prevent condensation.For an optimal processing we recommend to use the product in ambient conditions (20°C-23°C and a relative humidity of 60%-65%).
- PACKAGING
The 3B Continuous Filament Mat is wound on a hard carton tube with an inside hole of 102 mm and an external diame-ter of 110 mm. A PE stretch _x001f_ lm is wrapped around the roll to protect the material during handling and to help the slicing. All CFM rolls have 2 sides trimmed.The outside diameter of the roll is a standard of 55 cm.· For mat widths up to 210 mm : 6 vertical rolls per pallet· For mat widths above 210 mm : 6 horizontal rolls per palletEach roll is identi_x001f_ ed by a roll labelEach pallet is identi_x001f_ ed by minimum one pallet label inclu-ding the date and the pallet weight. The load is _x001f_ xed to the pallet with a stretch _x001f_ lm.
- Technology
- Composite Materials
- Composites End Use
- Door Components
- Door Panels
- Material Features
- Good Mechanical Properties
- HIGHLIGHTS
Insoluble binder; Continuous fiber; Improved integrity of the layers of the mat; Softness of the mat; High bundle linear density (tex) for Porosity; Can be unrolled, cut and conveyed to the mold without loosing mat integrity even with large parts for the M8615 series; Conform to complex and difficult shapes without causing wrinkles or leaving resin- rich radii, which may cause cracking; Resist to relocation in the mold under pressure and resin flow (wash resistance); Little resistance to resin flow for an easy porosityand fast wet-through, even with filled resin resulting in a high productivity
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyesters
- Polyurethanes (PU)
- Vinyl Esters
- Composite Materials Functions
- Reinforcement
- Composites Processing Methods
- Compression Molding
- Reinforced Reaction Injection Molding (RRIM)
- Resin Film Infusion (RFI)
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| width | 130-260 | cm |
| Weight | 300 - 750 | g/m2 |
| Bundle density | 30 | tex |
| Solid content | 2.5 | % |
