3B Fibreglass EM 1011
- Chemical Family
- Glass Beads & Fibers
3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.
Properties
- Physical Form
- Fiber
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
- Interior Fixtures
- Equipment & Parts
- Refining & Gas Processing
- Housings & Enclosures
- Printed Circuit Boards (PCBs)
Product Families
- Glass Fiber
Other characteristics
- Features
Ease of Handling, Easy Handling, Improved Flexibility
- Processing Methods
- Hand Lay-up
- Reinforcement Form
- Chopped Fiber
- Reinforcement Material
- Glass Fibers
- Compatible Polymers & Resins
- Epoxies (EP), Polyesters, Vinyl Esters
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Storage
Storage vertically in a cool and dry warehouse into the ori-ginal packaging is formally recommanded. More precisely ideal storage conditions are a temperature between 15°C & 35°C and a relative humidity comprised between 35% & 75%. If these conditions are maintained, the glass fiber product should not undergo significant changes when stored for extended periods of time. It is also strongly recommended to condition it in the workshop for at least 24hours before use to prevent condensation. For an optimal processing we recommend to use the product in ambient conditions (20°C-30°C and a relative humidity of 60%-65%).
- PACKAGING
The 3B Chopped Strand Mat is wound on a hard carton tube equivalent to length of mat with an inside hole of 76mm and an external diameter of 82mm. A roll is wrap-ped in polyethylene and packed in corrugated cartons (27cm x 27cm) having standard length. A typical pallet of 110cm x 110cm contains 16 cartons placed on pallet and stretch wrapped with plastic film for protection. Mat is one/both side trimmed.Each roll is identified by label. Each pallet is identified by minimum one pallet label including pallet weight.
- Technology
- Composite Materials
- Composites End Use
- Door Components
- Door Panels
- Doors
- Pipes
- Tanks
- Material Features
- Ease of Handling
- Improved Flexibility
- HIGHLIGHTS
Polyester, Vinylester and Epoxies Maximum flexibility on workshopscompatible; Rapid resin impregnation; Easy air removal; Excellent styrene solubility of binder; Less resin pick-up; Excellent drapability; Excellent integrity of Mat; Maximum flexibility on workshops with minimum inventory; High productivity; Good laminate surface; Fast wet-through and wet-out; Cost savings; Suits easily the surface of intricate molds; Easy handling and better appearance of finished product
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyesters
- Vinyl Esters
- Composite Materials Functions
- Reinforcement
- Composites Processing Methods
- Hand Lay-up
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| width | 125 | cm |
| Moisure content | max. 0.2 | % |
| Density/GSM | 300-600 | gm/sqm |
| width | 50 | cm |
| width | 100 | cm |
| Roll weight | 30-40 | kg |
| Solid content | 4.5 - 5.0 | % |
