3B Fibreglass CR 6202
- Chemical Family
- Glass Beads & Fibers
3B Fiberglass CR 6202 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.
Properties
- Physical Form
- Fiber
Product families
Applications
- Pipes & Plumbing
- Equipment & Parts
- Refining & Gas Processing
Product Families
- Glass Fiber
Other characteristics
- Features
Corrosion Resistance, Corrosion Resistant, Good Mechanical Properties, Good Surface Appearance, Good UV Protection, Great Surface Appearance, Improved Mechanical Properties, UV Protection
- Processing Methods
- Filament Winding
- Reinforcement Form
- Roving
- Reinforcement Material
- Glass Fibers
- Markets
- Building & Construction
- Industrial
- Storage
Storage vertically in a cool and dry warehouse into the ori-ginal packaging is formally recommanded. More precisely ideal storage conditions are a temperature between 15°C & 35°C and a relative humidity comprised between 35% & 75%. If these conditions are maintained, the glass fiber product should not undergo significant changes when stored for extended periods of time. It is also strongly recommended to condition it in the workshop for at least 24hours before use to prevent condensation. For an optimal processing we recommend to use the product in ambient conditions (20°C-30°C and a relative humidity of 60%-65%).
- PACKAGING
Bobbins are individually tack wrapped for protection, improved handling and to allow optimum transfer from bobbin to bobbin. Nominal weight of bobbin is around 17kg. A pallet of size 92cm x 110cm contains 48 bobbins and 110cm x 110cm contains 64 bobbins and stretch wrapped with plastic film for protection.. Two pallet configurations are available:• Bulk-pack: standard packaging, consists of individual bobbins• Creel-pack: bobbins are connected together for continuous unwinding and no bobbin handling by operators
- Technology
- Composite Materials
- Composites End Use
- Pipe Reinforcement
- Pipes
- Material Features
- Corrosion Resistant
- Good Mechanical Properties
- Good Surface Appearance
- Good UV Protection
- HIGHLIGHTS
Boron free E-CR glass; Easy unwinding and excellent chopping; Excellent dispersion and even distribution; Good air removal and quick wet-out; Good splitting efficiency & low fuzz formation; High level of UV transmission; High corrosion resistance; No interruption while processing, hence higher productivity; Good fabrics coverage; Good laminate surface; Minimal damage of fiber while processing, hence higher mechanical properties; High productivity in UV CIPP (Cured In Place Pipe) technologies
- Composite Materials Functions
- Reinforcement
- Composites Processing Methods
- Filament Winding
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Fibre diameter | 13 | μm |
| Moisure content | max. 0.2 | % |
| Linear density - tex | 2250-2400 | gm/km |
| Solid content (by weight) | 1.5 | % |
