3B Fibreglass SE 1043
- Chemical Family
- Glass Beads & Fibers
3B Fiberglass SE 1043 consists of continuous glass filaments bonded into a single strand and wound onto a bobbin shape without twist. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. Corrosion resistant SE 1043 Fibreglassmade of E-CR glass is specifi-cally designed for the manufacturing of composites pipes and under-ground & chemicals tanks. SE 1043 is also used in pultrusion to manufacture profiles and in weaving-knitting processes. SE 1043 is tested in compliance with BS 14020 and IS 11320.
Properties
- Physical Form
- Fiber
Product families
Applications
- Pipes & Plumbing
- Equipment & Parts
- Refining & Gas Processing
Product Families
- Glass Fiber
Other characteristics
- Features
Corrosion Resistance, Corrosion Resistant, Ease of Handling, Easy Handling, Good Mechanical Properties, Improved Flexibility, Improved Mechanical Properties
- Processing Methods
- Filament Winding, Pultrusion
- Reinforcement Form
- Roving
- Reinforcement Material
- Glass Fibers
- Compatible Polymers & Resins
- Epoxies (EP), Polyurethanes (PU), Vinyl Esters
- Markets
- Building & Construction
- Industrial
- Storage
Vertical storage in a cool and dry warehouse into the original packaging is formally recommended. More precisely ideal storage conditions are a temperature between 15°C and 35°C and a relative humidity comprised between 35% and 75%. If these conditions are maintained, the glass fiber product should not undergo significant changes when stored for extended periods of time. It is also strongly recommended to condition it in the work-shop for at least 24 hours before use to prevent condensa-tion. For an optimal processing it is recommended to use the product in ambient conditions (20°C-30°C and a relative humidity of 60%-65%). Vertical storage in a cool and dry warehouse into the original packaging is formally recommended. More precisely ideal storage conditions are a temperature between 15°C and 35°C and a relative humidity comprised between 35% and 75%. If these conditions are maintained, the glass fiber product should not undergo significant changes when stored for extended periods of time. It is also strongly recommended to condition it in the work-shop for at least 24 hours before use to prevent condensa-tion. For an optimal processing it is recommended to use the product in ambient conditions (20°C-30°C and a relative humidity of 60%-65%).
- PACKAGING
Bobbins are individually tack wrapped for protection, com-plete unwinding of the bobbins, improved handling and to allow optimum transfer from bobbin to bobbin (Creel-Pack). Nominal weights of bobbins vary from 10 to 22 kg. A pallet of size 92cm x 110cm contains 48 bobbins. A 110cm x 110cm pallet contains 64 bobbins. They are stretch wrapped with plastic film for protection.. Two pallet configurations are available:- Bulk-Pack: standard packaging, consists of individual bob-bins- Creel-Pack: bobbins are connected together for continuous unwinding (no bobbin handling for operators).
- Technology
- Composite Materials
- Composites End Use
- Pipe Reinforcement
- Pipes
- Material Features
- Corrosion Resistant
- Ease of Handling
- Good Mechanical Properties
- Improved Flexibility
- HIGHLIGHTS
Low fuzz formation; Boron-free E-CR glass; Good resin impregnation; Even tension; Minimal damage to fiber and higher mechanical properties; High corrosion resistance; Uniform and consistent product; Easy unwinding while processing
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyurethanes (PU)
- Vinyl Esters
- Composite Materials Functions
- Reinforcement
- Composites Processing Methods
- Filament Winding
- Pultrusion
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Filament diameter | 17-34 | µm |
| Linear density | 600 - 9600 | tex (gr/km) |
| Solid content (by weight) | 0.5 - 0.7 | % |
| Moisture content | max. 0.2 | % |
