3B Fibreglass MF 01 ER
3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
- Glazing & Window Elements
- Shingles & Tiles
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
- Equipment & Parts
- Tooling & Moldmaking
- Pavement Highways Roads & Bridges
- Dental
- Implants & Prosthetics
- Medical Devices & Assemblies
- Refining & Gas Processing
- Batteries
- Housings & Enclosures
- Printed Circuit Boards (PCBs)
- Power & Utilities
- Renewable Energy
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
- Glass Fiber
Other characteristics
- Features
Abrasion Resistance, Abrasion Resistant, Dimensional Stability, Excellent Adhesion, Excellent Flow, Flame Retardant, Good Adhesion, Good Shrinkage Resistance, Good Thermal Stability, High Flow, Improved Dimensional Stability, Thermal Stability
- Reinforcement Form
- Milled Fiber
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Storage
Storage in a cool and dry warehouse into their original packaging is formally recommended. Ideal storage condi-tions are a temperature between 15°C and 35°C and a relative humidity of 35% and 75%.Opened packages should be released to prevent conta-mination of the product or discard.If the following recommendations are followed, the glass fiber products should not undergo significant changes when stored for extended periods of time.If the product is not stored under these conditions, it is strongly recommended to condition it in the work shop for at least 24 hours before use.
- PACKAGING
MF 01 ER is packed in specific 1000kg polypropylene bags for optimal feeding. Bulk bags are of sufficient strength to insure adequate protection during transit and stores.The packaging stacking is not recommended.
- Technology
- Composite Materials
- Composites End Use
- Pipes
- Tanks
- Material Features
- Abrasion Resistant
- Dimensional Stability
- Flame Retardant
- Good Adhesion
- Good Shrinkage Resistance
- Good Thermal Stability
- High Flow
- HIGHLIGHTS
Powder form; Reduction of deformations, better dimensional stability and shrinkage control; Improved thermal properties; Flame retardant effect; Higher resistance to abrasion; Anti-crack effect in gel coating and paints; Viscosity increase; Good flowability and easy to blend into resin or liquid; Increased productivity; Excellent surface finishing
- Composite Materials Functions
- Reinforcement
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Tamp density | 50-85 | ml/100gr |
| Aspect ratio (Length/diameter) | 1.5 | — |
| Solid content | max. 0.30 | % |
| Morphology | Powdery | — |
