ALDOSEAL 399
- Chemical Family
- Silicon-based Compounds
ALDOSEAL 399 is a high solid, low VOC, one-part silicone elastomeric flashing grade specifically designed for use in sealing roof penetrations, curbs, seams, flashing areas and any other roof top areas of possible water infiltration. It is also the sealant of choice for any roof system that has been previously coated with a silicone elastomeric coating. Once applied, this silicone flashing grade provides a durable, seamless and flexible system that resists lateral movement, shear and will allow for normal expansion and contraction. ALDOSEAL 399 provides greater waterproofing protection than similar flashing grade silicone sealants and offers increased resistance to moisture penetration.
Product families
- Caulks & Sealants
Other characteristics
- Brand
- ALDOSEAL
- Product Type
1K (1 component) Coating, 1K (1 component) Sealant; 1K (1 component) Coating; 1K (1 component) Sealant
- Application Area
- Roofing Membranes
- Application Method
- Brush, Roller, Spray
- Usage
ALDOSEAL 399 was specifically developed as a protective sealant for pipe boots, seams, flashing areas, curbs, exposed fasteners and all other breaches in a roof system that will allow water to enter a structure.. With excellent adhesion to other silicone products, ALDOSEAL 399 is proven to provide long term durability versus water based sealants.
- Markets
- Building & Construction
- Shelf LIfe
- 12 Months (50°F - 85°F)
- Technology
- Ready-to-Use Products
- Clean Up Solvent
- Aldo Thinner II
- Application Methods
- Brush
- Roller
- Spray
- Handling
Avoid contamination in sealed containers.; Store away from heat and sources of ignition.; Do not inhale vapor or mist; do not get on skin, in eyes or on clothing.
- Ready to Use Product Features
- Durable
- Excellent Substrate Adhesion
- Flexible
- High Solids Content
- Low VOC
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Method |
|---|---|---|
| Total Solids (Volume) | 92 - 98 | % |
| Weight | 10.7 | lbs/gal |
| Flash Point | min. 200 | °F |
| Viscosity | 150000.0 | cPs |
| Elongation (Initial) | 275.0 | % |
| Hardness | 45 - 55 | Shore A |
| Tensile Strength | 130.0 | psi |
| Permeability | 4.2 | perms |
| Service Temperature | -25 to 175 | º F |
| Cure Time | 12.0 - 18.0 | Hours |
| Tack Free | 1.0 - 2.0 | Hours |
| VOC | max. 50 | g/l |
