ALDOSEAL 385
- Chemical Family
- Polyurethanes (PU)
ALDOSEAL 385 is a technologically advanced, high solids, single component moisture cure polyurethane elastomeric sealant. In addition, it is a brush grade sealant and an excellent all-purpose sealer to address roof leaks on most roofing substrates. It is produced in an aluminum gray color that allows for faster cure times than white sealants. ALDOSEAL 385 provides greater protection against leaks and water penetration than most sealants due to its tenacious adhesive properties, higher tensile strength and low vapor permeability values and offers a wider window of application than water based acrylic sealants.
Product families
- Caulks & Sealants
Other characteristics
- Brand
- ALDOSEAL
- Cure Method
- Moisture Cure
- Product Type
- 1K (1 component) Sealant
- Application Area
- Roofing Membranes
- Application Method
- Brush
- Compatible Substrates & Surfaces
- Metal
- Usage
ALDOSEAL 385 is specifically designed as a protective sealant during the detail phase of complete elastomeric roof coating restoration work.; This product is formulated to seal fasteners and seams and penetrations on a metal roof systems, seams and penetrations on single ply membrane systems and fill cracks and voids on older BUR systems.; In addition, ALDOSEAL 385 is an ideal all purpose sealant to quickly and permanently seal leak areas on virtually any roofing system.
- Color
- Grey
- Markets
- Building & Construction
- Shelf LIfe
- 90 Days (40°F - 90°F)
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Clean Up Solvent
- Xylene
- Application Methods
- Brush
- Handling
Avoid application over unintended areas; adhesive properties make removal difficult after product has cured on any surface.; Avoid moisture contamination in sealed containers.; Store in dry environment between 55ºF and 75ºF.; Keep away from heat, open flame or sparks.; Use only in well ventilated areas with proper protective equipment.; Avoid breathing vapor or mist.
- Ready to Use Product Features
- Excellent Substrate Adhesion
- Good Adhesion
- High Solids Content
- High Tensile Strength
- Low Permeability
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Method |
|---|---|---|
| Total Solids (Weight) | 77 - 81 | % |
| Weight | 9.0 - 9.4 | lbs/gal |
| Flash Point | 80.0 | °F |
| Viscosity | 20000 - 40000 | cP |
| Elongation (Initial) | 100 - 200 | % |
| Hardness | 69.0 | Shore A |
| Tensile Strength | 215 - 265 | psi |
| Permeability | 0.02 | perm inch |
| Service Temperature | -50 to 200 | º F |
| Cure Time (Dry to Touch) | 6.0 | Hours |
| Cure Time (Tack Free) | 8.0 - 12.0 | Hours |
| Cure Time (Re-Coat) | 12 - 16 | Hours |
