ALDOSEAL 747
ALDOSEAL 747 is a single component vapor retarder thermoplastic seam sealer specially formulated to provide a waterproof, weather resistant membrane with excellent permeability and ultraviolet protection. It offers good elongation and tensile strength to resist lateral movement and allow for expansion and contraction of the substrate.
Product families
- Caulks & Sealants
Other characteristics
- Brand
- ALDOSEAL
- Product Type
- 1K (1 component) Coating, Sealer
- 1K (1 component) Coating
- Sealer
- Application Area
- Sanitary Seal, Seam Sealing
- Sanitary Seal
- Seam Sealing
- Application Method
- Brush, Trowel
- Usage
ALDOSEAL 747 is recommended as a protective vapor retarder seam sealer for a variety of situations, including all types of seams, fasteners, gaps between metal panels, gutters, vent pipe flashings, air conditioning units and expansion joints.
- Color
- White
- Markets
- Building & Construction
- Consumer Goods
- Shelf LIfe
- 12 Months (40°F - 90°F)
- Technology
- Ready-to-Use Products
- Clean Up Solvent
- Xylene
- Application Methods
- Brush
- Trowel
- Handling
This product contains VM & P naphtha and xylene.; Keep away from heat, open flame or sparks. Use only in well ventilated areas with proper protective equipment.; Avoid breathing vapor or mist. Approved (MESA/NIOSH) chemical respirator and protective clothing must be worn by applicator and personnel in vicinity of the application.; Mechanical exhaust ventilation may be required in enclosed areas.; Positive pressure fresh air hose masks are required for interior applications.
- Ready to Use Product Features
- Excellent Substrate Adhesion
- Good Elongation
- Good Gap Filling Capabilities
- Good UV Protection
- Good Weather Stability
- High Gas Permeability
- High Tensile Strength
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Total Solids (Weight) | 53 - 59 | — | % |
| Weight | 7.4 - 7.8 | — | lbs/gal |
| Flash Point | 68.0 | — | °F |
| Viscosity | 50000 - 80000 | — | cP |
| Elongation | 450 - 550 | — | % |
| Hardness | 55.0 | — | Shore A |
| Tensile Strength | 450 - 550 | psi | — |
| Permeability | 0.005 | perm inch | — |
| Service Temperature | -50 to 200 | º F | — |
