To catalogue
Ecomass® Compound 3330TU96 Nat
- Chemical Family
- Polyether Ether Ketone (PEEK)
Ecomass® Compound 3330TU96 Nat is a high specific gravity, tungsten powder-filled polyetheretherketone (PEEK) compound that is rigid. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting, balancing, and radiation shielding applications.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Sports & Recreation
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Electrical & Electronics — Parts & Components
- Housings & Enclosures
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- Ecomass
- Density
- 11000.0 - 11000.0 kg/m³
- Polymer Name
- Polyetheretherketone (PEEK)
- Fillers Included
- Tungsten
- Processing Methods
- Injection Molding, Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Technology
- Composite Materials
- Plastics
- Labeling Claims
- Non-Toxic
- Material Features
- Good Rigidity
- Good Toughness
- Heavy Plastic
- High Density
- High Density Thermoplastic Composite
- High Specific Gravity
- Hot Operating Temperature
- Lead Substitute
- Certifications and Compliance
- RoHS Compliant
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Casino Chips
- Frangible Projectiles
- Golf Club Weights
- Hub Odometer
- Inertia Discs
- Instrument Housing
- Manual Transmission Shifter Cartridge
- Medical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 11 | g/cc | ASTM D792 |
Table 2 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 31 | MPa | ASTM D638 |
| Tensile Modulus | 9655 | MPa | ASTM D638 |
| Tensile Elongation at Break | max. 1 | % | ASTM D638 |
| Flexural Modulus | 9103 | MPa | ASTM D790 |
| Izod Impact Strength, Notched | 43 | J/m | ASTM D256 |
Table 3 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 66 psi) | 160 | °C | ASTM D648 |
| Heat Deflection Temperature (at 264 psi) | 149 | °C | ASTM D648 |
Table 4 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Temperature Range | 350 - 370 | °C | — |
| Mold Temperature Range | 165 - 205 | °C | — |
| Mold Shrinkage Rate | 0.3 - 0.5 | % | ASTM D955 |
| Pre-Drying Conditions (at 150C) | 6 - 8 | hrs | — |
