Novista Chlorinated Polyethylene CM 130A
- Chemical Family
- PolyethylenesPolyolefins
Novista Chlorinated Polyethylene CM 130A is one chlorinated polyethylene thermoplastic elastomer, which also has excellent low-temperature toughness and processing ability. The processing property with the high dosage of inorganic filler still keep good and the surface of the production will be smooth and exquisite.
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Other Consumer Goods Applications
- Jacketing & Insulation
Product Families
- Thermoplastic Olefin Elastomers (TPO)
Other characteristics
- Features
Good Processability, Good Surface Finish, Low Temperature Toughness
- Polymer Name
- Chlorinated Polyethylene (CPE)
- Markets
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Packaging Type
- Bags
- Material Features
- Good Processability
- Good Surface Finish
- Low Temperature Toughness
- Packaging and Storage
25kg PP valve bag; The product can be stored under appropriate conditions for two years. But please keep products store in a dry ventilated environment (temperature should not exceed 30°C, in low humidity). Inappropriate storage environment may cause agglomeration. Especially at high temperatures & high humidity, it is recommended not to stack more than 30 days long, it may increase agglomeration phenomenon. Agglomeration does not affect the quality and performance, not a quality problem, but agglomeration material is smashed before using .
- Compatible Polymers and Resins
- Ethylene Propylene Diene Monomer (EPDM)
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Chlorine Content | 35+1 | % | ISO 7725 |
| Hardness | max. 65 | Shore A | ISO 7619 |
| Heat of Fusion | max. 2 | J/g/100g | DSC |
| Elongation at Break | min. 700 | % | ISO 37 |
| Mooney Viscosity | 65 - 75 | ML(125°C 1+4) | — |
| Whiteness E457 | min. 80 | ° | — |
| Rate of Filtration (#40 mesh) | min. 98 | % | — |
| Tensile Strength | min. 8.0 | Mpa | ISO 37 |
| Volatile Matter Component | max. 0.4 | % | ISO 1269 |
