Novista Chlorinated Polyethylene CM 352
- Chemical Family
- PolyethylenesPolyolefins
Novista Chlorinated Polyethylene CM 352 is Chlorinated polyethylene with low molecular weight. It can be applied in many fields and show excellent processibility. Its performance is similar to Tyrin CM0636 made from Dow Chemical .
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Pipes & Plumbing
- Other Industrial Applications
- Jacketing & Insulation
Product Families
- Thermoplastic Olefin Elastomers (TPO)
Other characteristics
- Features
- Good Processability, Low Molecular Weight
- Polymer Name
- Chlorinated Polyethylene (CPE)
- Markets
- Building & Construction
- Electrical & Electronics
- Industrial
- Technology
- Elastomers
- Packaging Type
- Bags
- Material Features
- Good Processability
- Low Molecular Weight
- Packaging and Storage
25kg PP valve bag; The product can be stored under appropriate conditions for two years. But please keep products store in a dry ventilated environment (temperature should not exceed 30°C, in low humidity). Inappropriate storage environment may cause agglomeration. Especially at high temperatures & high humidity, it is recommended not to stack more than 30 days long, it may increase agglomeration phenomenon. Agglomeration does not affect the quality and performance, not a quality problem, but agglomeration material is smashed before using .
- Compatible Polymers and Resins
- Chloroprene Rubber (CR)
- Natural Rubbers (NR)
- Nitrile Butadiene Rubber (NBR)
- Styrene Butadiene Rubber (SBR)
- Plastics and Elastomers End Uses
- Cables
- Hoses
- Wires
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Chlorine Content | 35+1 | % | ISO 7725 |
| Hardness | max. 56 | Shore A | ISO 7619 |
| Heat of Fusion | max. 2 | J/g/100g | DSC |
| Elongation at Break | min. 700 | % | ISO 37 |
| Mooney Viscosity | 50 - 60 | ML(125°C 1+4) | — |
| Whiteness E457 | min. 80 | ° | — |
| Rate of Filtration (#40 mesh) | min. 98 | % | — |
| Tensile Strength | min. 8.0 | Mpa | ISO 37 |
| Volatile Matter Component | max. 0.4 | % | ISO 1269 |
