Novista Chlorinated Polyethylene CM 353
- Chemical Family
- PolyethylenesPolyolefins
Novista Chlorinated Polyethylene CM 353 is chlorinated polyethylene with high molecular weight and relatively narrow molecular weight distribution. It show excellent physical performance in finished products. Its performance is similar to Tyrin CM0836 & Tyrin CM3551 made from Dow Chemical.
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Consumer Goods — Other Consumer Goods Applications
- Pipes & Plumbing
- Other Industrial Applications
- Jacketing & Insulation
Product Families
- Thermoplastic Olefin Elastomers (TPO)
Other characteristics
- Features
High Molecular Weight, Narrow Molecular Weight Distribution
- Polymer Name
- Chlorinated Polyethylene (CPE)
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Elastomers
- Packaging Type
- Bags
- Material Features
- High Molecular Weight
- Narrow Molecular Weight Distribution
- Packaging and Storage
25kg PP valve bag; The product can be stored under appropriate conditions for two years. But please keep products store in a dry ventilated environment (temperature should not exceed 30°C, in low humidity). Inappropriate storage environment may cause agglomeration. Especially at high temperatures & high humidity, it is recommended not to stack more than 30 days long, it may increase agglomeration phenomenon. Agglomeration does not affect the quality and performance, not a quality problem, but agglomeration material is smashed before using .
- Compatible Polymers and Resins
- Chloroprene Rubber (CR)
- Natural Rubbers (NR)
- Nitrile Butadiene Rubber (NBR)
- Styrene Butadiene Rubber (SBR)
- Plastics and Elastomers End Uses
- Cable Jacketing
- Hoses
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Chlorine Content | 35+1 | % | ISO 7725 |
| Hardness | max. 57 | Shore A | ISO 7619 |
| Elongation at Break | min. 700 | % | ISO 37 |
| Heat of Fusion | max. 2 | J/g/100g | DSC |
| Mooney Viscosity | 90 - 105 | ML(125°C 1+4) | — |
| Whiteness E457 | min. 80 | ° | — |
| Rate of Filtration (#40 mesh) | min. 98 | % | — |
| Tensile Strength | min. 8.0 | Mpa | ISO 37 |
| Volatile Matter Component | max. 0.4 | % | ISO 1269 |
