NuSil™ CV16-2500
- Chemical Family
- Silicones
NuSil™ CV16-2500 is a controlled volatility silicone elastomer.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Adhesives & Sealants
- Other Parts & Components
Product Families
- Conductive Adhesives
Other characteristics
- Brand
- NuSil
- Product Type
- Conductive Adhesive, Potting Compound
- Conductive Adhesive
- Potting Compound
- Application Area
- Electrical Components
- Markets
- Consumer Goods
- Electrical & Electronics
- Appearance
- Clear
- Technology
- Ready-to-Use Products
- HIGHLIGHTS
Two-part, low viscosity clear RTV silicone; Designed for enhanced performance in extreme low and high temperatures; 10:1 Mix Ratio (Part A:Part B)
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Use Instructions
Mixing; Thoroughly mix Part A and Part B, in a 10:1 mix ratio by weight prior to use.; Vacuum Deaeration; Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.; Inhibition Concerns; Cures in contact with most materials, exceptions include: sulfurcured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents. Note: Some bonding applications may require the use of a primer. NuSil Technology CF1-135 silicone primer is recommended.; Adjustable Cure; Schedule Product cures at a wide range of cure times and temperatures to accommodate different production needs.
- Ready to Use Product Features
- Good Thermal Stability
- Low Outgassing
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 5,300 (5,300 ) | cP (Mpa*s) |
| Lap Shear | 200 (1.38 ) | psi (MPa) |
| Durometer Type A | 40.0 | — |
| Cte | 490.0 | ppm/°C |
| Elongat ion | 100.0 | % |
| Mix Rat io | 0.417361111 | — |
| Refractive Index | 1.43 | — |
| Specific Gravity | 1.04 | — |
| Tensile | 650 (4.48 ) | psi (MPa) |
| Work Time | 2.0 | hours |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Cure System | Platinum | — |
| Cure at 65 °C | 4.0 | hours |
