NuSil™ MED10-6607
- Chemical Family
- Silicones
NuSil™ MED10-6607 is a RTV silicone dispersion.
Properties
- Physical Form
- Dispersion
Product families
Applications
- Medical Devices & Assemblies
- Medical Tapes & Adhesives
- Other Medical Applications
Product Families
- Other Adhesives & Sealants
Other characteristics
- Brand
- NuSil
- Cure Method
- Moisture Cure
- Product Type
- Adhesive, Coating
- Adhesive
- Coating
- Application Area
- Medical Applications
- Application Method
- Dip Coating, Spray
- Markets
- Healthcare & Pharma
- Appearance
- Translucent
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Application Methods
- Dip Coating
- Spray
- HIGHLIGHTS
High Strength, one-part, flowable RTV silicone dispersion; Cures at room temperature upon exposure to atmospheric moisture
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Use Instructions
Mixing; Thoroughly stir material to ensure homogeneity. Exercise care to prevent solvent loss during deairing. Accomplish additional dilution for thin film applications by adding appropriate solvent. Mixer design/size/type, blade/propeller type, shear/RPM levels, and heat generated during mixing, are important parameters and should be addressed in order to have an adequately mixed dispersion. Warning: Consult the MSDS for MED10-6607 prior to use, as its solvent carrier is hazardous.; Coating and Use; Dispersions are more commonly used in dip molding processes, but can also be sprayed or cast. Make sure to apply under a fume hood or in a well ventilated environment. Care should be taken before placing coated mandrels or parts in oven due to the presence of solvent.
- Storage and Handling
Most dispersions are stored prior to application. It is important to note that NuSil recommends keeping the dispersion in its original container when possible, tightly sealed and stored below 40º C. Care should be taken to prevent solvent evaporation and contamination during long or short term storage.
- Ready to Use Product Features
- High Strength
- Low Viscosity
- Plastics and Elastomers End Uses
- Drug Delivery Pens
Technical data
Table 1 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 6,000 (6,000 ) | cP (Mpa*s) |
| Non Volat ile Content | 35.0 | % |
| Durometer Type A | 40.0 | — |
| Elongat ion | 650.0 | % |
| Mix Rat io | 1 PART | — |
| Solvent | Naptha | — |
| Specific Gravity | 1.1 | — |
| Tear | 95 (16.75 ) | ppi (kN/m) |
| Tensile | 1,200 (8.28 ) | psi (MPa) |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Cure System | Oxime | — |
| Cure at RTV | 7.0 | days |
