Collano H 96 -19
Collano H 96 -19 is a white contact adhesive, solvent-free.
Product families
Applications
- Consumer Goods — Furniture
- Construction Adhesives
Product Families
- Contact Adhesives
Other characteristics
- Brand
- Collano
- Product Type
- Adhesive
- Application Area
- Furniture
- Compatible Substrates & Surfaces
- Aluminum, Concrete, Metal, Textiles, Wood
- Markets
- Building & Construction
- Consumer Goods
- Storage
12 months in unopened original packaging at 15–25 °C (frost susceptible).
- PACKAGING
- Plastic pails 2.5 kg.
- Appearance
- Liquid, max4
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
- Labeling Claims
- Environmentally Friendly
- Solvent-free
- Technical Details
Temperature Resistance; To +110 °C.; Eco Label; Eco-1, very suitable for Minergie-Eco, Minergie-A and Minergie-P.; IMO Certificate; Meets requirements of the IMO (International Maritime Organization) Certificate no. 43593/A3 MED.
- Usage
Test adhesives are indispensable due to the variety of materials. For joining laminated panels, furniture edges, aluminum, lead, cork, leather, linoleum, polyurethane foam, textiles, felt, decorative foils among each other and on wooden materials, absorbent and non-absorbent materials, plaster- and cement-bonded panels. Other applications are possible. Not suitable for outdoor applications. Risk of oxidation on iron, copper and brass.; Apply to both sides. The figures are based on results of tests on bonds made under standard conditions (20 °C and 65% relative humidity). Different conditions may lead to deviations from the said specifications.; Adhesive application quantity; Total adhesive application 140–220 g/m², depending on the absorbency of the materials.; Pressure; 0.1-0.8 N/mm2 , the higher the pressure, the higher the cohesion.; Apply adhesive evenly on both sides using a roller. On porous and highly absorbent materials such as chipboard edges, is recommended a second application after approx. 5 minutes waiting time. Flash-off time can be shortened with heat (hot-air dryer, infrared emitter).; Important; Only join the two parts together when the adhesive is transparent. Uniform and strong pressing with a pressure roller or pressing device is a prerequisite for permanent bonding.; In wet condition with water. When cured, mechanically or with hot water.
- Compatible Substrates and Surfaces
- Aluminum
- Concrete
- Metal
- Textiles
- Wood
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Base | Polymer resin dispersion | — |
| Solids Content | 48.0 | % |
| Viscosity (Brookfield) | 8'000 | mPa·s |
| pH | 7.0 | — |
| Minimum Press Time | Few | seconds |
| Flash-Off Time | min. 20 | minutes |
Table 2 of 2
1 row| Characteristic | Value |
|---|---|
| Flammability | Not flammable |
