Collano DW 2044
- Chemical Family
- Polyvinyl Acetates (PVA)
Collano DW 2044 is a 1C dispersion adhesive, water-resistant D4 and heat-resistant Watt 91 which is white in color.
Properties
- Physical Form
- Dispersion
Product families
- Contact Adhesives
Other characteristics
- Brand
- Collano
- Product Type
- Adhesive
- Application Area
- Furniture
- Compatible Substrates & Surfaces
- Composites, Wood
- Color
- White
- Markets
- Consumer Goods
- Appearance
- Liquid
- Applications
- Consumer Goods — Furniture
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
- Totes (IBC)
- Labeling Claims
- Environmentally Friendly
- Technical Details
Information derives from tests carried out by Collano and testing institute ift Rosenheim.; Bond Strength; EN 204, stress group D4; Temperature Resistance; EN 14257 (Watt 91) > 7 N/mm² at 80 °C; Eco Label; Eco-1, very suitable for Minergie-ECO; Guidelines; FFF-FKS-EMPA 08.03/2013
- Usage
For window and door bonding, lamellae and finger-joints for non-structural applications, divider and element manufacture, general bonding of woods and composites in kitchen, laboratory, and interior construction. Suitable for exterior applications if the joints are protected against direct weather exposure. Suitable for high frequency bonding.; The curing behavior of PVAc dispersions depends on the absorbency and strength of the adherends, as well as the ambient temperature and press temperature. The specified figures are guideline values and are based on results of tests on precision bonds made under standard climatic conditions (20°C and 65% relative humidity). Deviations are possible depending on the type of use.; It is essential that the surfaces are clean and grease-free in order to provide the best adhesion and quality of join. Apply adhesive to one surface, in case of high requirements to water resistance to both surfaces. Stir before use.; Minimum press time; 20 °C: > 15 minutes; 70 °C: > 1 minute; In contact with iron, adhesive may cause wood discoloration. Due to the risk of corrosion, all parts which come in contact with this glue during processing must be made of stainless steel (quality V4A) or synthetic material.; With water before adhesive has dried.
- Packaging And Availability
- Plastic pails 25 kg
- IBC containers 1'100 kg.
- Ready to Use Product Features
- Good Bonding Strength
- Heat Resistance
- Water Resistant
- Compatible Substrates and Surfaces
- Composites
- Wood
Technical data
Table 1 of 3
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Base | PVAc - Dispersion | — |
| Density | 1.0 | g/cm³ |
| Solids Content | 45.0 | % |
| Fluidity | Flowing | — |
| Viscosity (Brookfield) | 6'000 | mPa·s |
| pH | 4.0 | — |
| Chalking Point | 8.0 | °C |
| Pressure | 0.1 - 0.8 | N/mm² |
| Material Moisture Content | 8 - 12 | % |
| Application Temperature | min. 12 | °C |
| Maximum Open Assembly Time | max. 9 | minutes |
| Conditioning Time | 2.0 | hours |
Table 2 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Adhesive Application Quantity | 150 - 200 | g/m² |
Table 3 of 3
1 row| Characteristic | Value |
|---|---|
| Flammability | Not flammable |
