Collano FL 330

Other characteristics

Brand

Collano

Product Type

Adhesive

Compatible Substrates & Surfaces

Wood

Color

White

Markets

Consumer Goods

Storage

9 months in unopened original packaging at 15–25 °C (frost susceptible).; 12 hours with Collano Hardener HR 910.

PACKAGING

Plastic bottles 300 g and 800 g; Plastic tanks 10 kg for Collano Easy Applico 2000; Plastic pails 12 kg and 25 kg; IBC containers 600 kg and 1'100 kg

Appearance

Liquid

Applications

Consumer Goods — Furniture

Technology

Ready-to-Use Products

Packaging Type

• Bottles
• Pails
• Tanks
• Totes (IBC)

Labeling Claims

• Cold Processable
• Environmentally Friendly

Technical Details

Information derives from tests carried out by Collano.; Bond Strength; EN 204, stress group D3; Stress group D4 with Collano hardener HR 910; Temperature Resistance; EN 14257 (Watt 91) > 7 N/mm² at 80 °C; Eco Label; Eco2, suitable for Minergie-ECO

Usage

For veneering as well as general carpentry work. For high-quality wood bonding in furniture and interior construction, veneer and laminate bonding, joint and construction bonding (body, table, chair, window, etc.), veneering of cement-bonded chipboard and gypsum plasterboard. For cold or hot pressing and high-frequency bonding.; The curing behavior of PVAc dispersions depends on the absorbency and strength of the adherends, as well as the ambient temperature and press temperature. The specified figures are guideline values and are based on results of tests on precision bonds made under standard climatic conditions (20°C and 65% relative humidity). Deviations are possible depending on the type of use.; It is essential that the surfaces are clean and grease-free in order to provide the best adhesion and quality of join. In case of long run times of the application system, the adhesive can be restored to normal consistency by adding 5% water. If required, the adhesive may be colored using a water-soluble wood stain or Pintasol/Mixol. Wait at least 24 hours before carrying out surface treatments. Apply the adhesive to one of the surfaces, or to both surfaces for hardwoods and exotic woods, and for slotted/tenon joints. When applying from plastic tank, follow the Collano Easy Applico 2000 operating instructions.; Minimum press time; 20 °C: > 10 minutes; 50 °C: > 5 minutes; 80 °C: > 2 minutes; In contact with iron, adhesive may cause wood discoloration. Water-resistance of the seal (D4) is increased by adding 5% (by weight) of Collano hardener HR 910. Mix well with hardener. Mixture can be processed for 12 hours.; With water before adhesive has dried.

Show in full

Ready to Use Product Features

• Good Bonding Strength
• Water Resistant

Compatible Substrates and Surfaces

Wood