DISSCO® 721 Emulsified Non-Fibered Foundation Coating
DISSCO® 721 Emulsified Non-Fibered Foundation Coating is a cationic slow setting emulsified bitumen designed for use as a below grade foundation damp-proofing compound for applications where it is desired to prevent dampness or moisture that may be present in below-grade applications from penetrating the foundation, thus preventing the damp feeling common to most basements. However, where a high water content or hydrostatic pressure is present the coating to be used should be upgraded to a true waterproofing compound. It is suitable for use on almost any material such as concrete, masonry block, Styrofoam block, wood, steel, plastic. It is environmentally friendly containing no solvents. It is ready to use, no mixing or thinning is necessary and no heating required.
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- DISSCO
- Features
- Water Resistant
- Product Type
- Solventborne Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Plastics, Steel, Wood
- Color
- Black
- Caution
For professional use only. Use with adequate ventilation. Avoid prolonged or repeated contact with skin or breathing of vapor. Close container tightly after each use. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call physician immediately. Keep out of reach of children.
- Markets
- Paints & Coatings
- Storage
DISSCO 721 may be stored outdoors when ambient air temperatures are above 40°F (4°C). DISSCO 721 is water based and will freeze. Keep from freezing. Clean tools with water immediately after use. If DISSCO 721 has cured clean with mineral spirits or petroleum distillate.
- Cure Time Cycle
Cure time will vary depending on weather conditions. Product will appear brown in color after applied and will turn black in color when cured.
- Application
DISSCO 721 is ready to use directly from the container. Surface to be coated must be clean and dry, free of any material which prevents proper adhesion. DISSCO 721 can be applied by roller, brush or spray with adequate airless spray equipment. It is recommended that masonry block be parged (cement grouted) prior to application.
- Applications
Paints & Coatings — Other Paints & Coatings Applications
- Availability
DISSCO 721 is delivered ready to use and is available in bulk and in packaged sizes of 5 gallon pails and 55 gallon drums and 275 gallon totes.
- Technology
- Ready-to-Use Products
- Specification
DISSCO 721 meets specifications ASTM-D-1227 Type III Class 2.
- Labeling Claims
- Environmentally Friendly
- Solvent-free
- Application Rates
For a one coat application it is recommended that the DISSCO 721 be applied at a coverage rate of 1.25 to 2.0 gallons per 100 square feet of surface area with a dry film thickness of approximately 15 mills. For a two coat application each coat should be applied at a coverage rate of 1.0 to 1.5 gallons per 100 square feet with a two coat dry film thickness of approximately 20 mills. The first coat should be allowed to cure for at least 4 hours before the second coat is applied. Do not apply when rain is imminent or when surface to be coated or ambient air temperature is forecast or below 40ºF (4ºC) within 24 hours of application.
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Water Resistant
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Plastics
- Steel
- Wood
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Boiling Point | 212.0 | °F |
| Vehicle Solids | 50 - 60 | %/wt |
| Volatile Vehicle | 40 - 50 | % |
| Weight per gallon | 8.2 - 8.35 | lbs. |
