DISSCO® 591 Pipe Coating
DISSCO® 591 Pipe Coating is a non-fibered bituminous coating for coating steel pipe and steel pilings and weld plates that is to be installed in subsurface installations. It improves the dielectric resistance and is impervious to salts and alkali that readily attack underground piping, leading to eventual metal fatigue and failure. DISSCO® 591 dries to a semi-hard black surface that allows for tack free handling and decreases friction associated with pile driving or horizontal pipe placement. DISSCO® 591 is manufactured with high grade hard pen industrial type asphalts, fast drying solvents formulated together with special additives that allows the DISSCO® 591 to adhere to steel pipe much more readily than most other products available today.
Product families
Applications
- Pipes & Plumbing
- Industrial Coatings
Product Families
- Other Paints & Coatings
Other characteristics
- Brand
- DISSCO
- Features
Alkali Resistant, Excellent Dielectric Properties, Salt Resistance
- Product Type
- Coating
- Application Area
- Pipes
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Metal, Steel
- Color
- Black
- Caution
It contains petroleum distillates. Do not use near fire or flame. Use with adequate ventilation. Vapor is harmful, avoid prolonged or repeated contact with skin or breathing of vapor. Close container tightly after each use. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call physician immediately. Keep out of reach of children.
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGING
DISSCO® 591 is available in packages sizes of 5-gallon pails and 55-gallon drums.
- Application
DISSCO® 591 is ready to use directly from the container. DISSCO® 591 requires no thinning or heating required and can be applied by brush or sprayed with adequate airless equipment. The surface to be coated must be clean and dry, free of any material or oils, which shall prevent proper adhesion to the surface.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Application Methods
- Brush
- Spray
- Recommended Coverage
It is recommended that each coat of DISSCO® 591 be applied at a rate of 100 to 150 sq ft per gallon with a dry film thickness of 8 to 10 mills (0.2 - 0.25 mm)
- Ready to Use Product Features
- Alkali Resistant
- Excellent Dielectric Properties
- Salt Resistance
- Compatible Substrates and Surfaces
- Metal
- Steel
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Asphalt Softening Point | min. 190 | °F |
| Flash Point | 57.0 | °F |
| Vehicle Solids | 40 - 50 | %/wt |
| Viscosity (77°F) | 150 - 300 | cPs |
| Volatile Vehicle | 50 - 60 | %/wt |
| Weight per gallon | 6.9 | lbs. |
