DISSCO® 551 Non-Fibered Roof Coating
DISSCO® 551 Non-Fibered Roof Coating is a ready to use, non-fibered asphalt base coating of heavy paint consistency, manufactured with high grade industrial type blown asphalts and industrial grade solvents compounded with special slow drying, penetrating weatherproofing oils. It is specially formulated for priming all dried out asphalt based composition roof surfaces to re-saturate and revitalize the old felt to a full-bodied, uniform, weatherproof base for proper application of DISSCO 550 Fibered Roof Coating. DISSCO 551 is inert to mild acids and alkali, chemically inert, non-poisonous and non-toxic when used as directed.
Product families
Applications
- Pipes & Plumbing
- Industrial Coatings
Product Families
- Base Coats & Undercoats
Other characteristics
- Brand
- DISSCO
- Features
Acid Resistant, Alkali Resistant, Chemical Resistant, Corrosion Resistant, Cost Effective, Good Weather Stability, Non-Toxic, Water Resistant
- Product Type
- Base Coat
- Application Area
- Pipes, Tanks
- Pipes
- Tanks
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal
- Usage
DISSCO 551 is also excellent preventative maintenance coating to prevent the sun and other weathering elements from deteriorating the composition roofing. Also widely used as an economical protective coating for masonry and metal surfaces, such as metal roofs, gutters, spouts, tanks, structural iron, underground pipes, etc. which need protection against water and rust damage.
- Color
- Black
- Caution
It contains mineral spirits. Do not use near fire or flame. Use with adequate ventilation. Vapor is harmful, avoid prolonged or repeated contact with skin or breathing of vapor. Close container tightly after each use. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call physician immediately. Keep out of reach of children.
- Markets
- Building & Construction
- Paints & Coatings
- Application
DISSCO 551 is ready to use directly from the container. No thinning or heating required. DISSCO 551 can be applied by roller, brush, or sprayed with adequate airless equipment. The surface to be coated must be clean and dry, free of any material which prevents proper adhesion to the surface.
- Availability
DISSCO 551 is available in three standard viscosities (custom grades are available by special order), and is available bulk and in packaged sizes of 5-gallon pails or 55-gallon drums.
- Technology
- Ready-to-Use Products
- Specification
Base asphalt meets specification ASTM D-449 Type II.; DISSCO 551 meets or exceeds specifications:; ASTM D-41; Federal Specification SS-A-701
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Non-Toxic
- Application Methods
- Brush
- Roller
- Spray
- Handling
Will not freeze, may be stored outdoors. When temperature is below 60°F, store product indoors overnight prior to use. Clean equipment with mineral spirits.
- Recommended Coverage
It is recommended that the DISSCO 551 be applied at a rate of 1 to 2 gallons per 100 square feet of area. Application rates may vary with the condition of the surface to be coated.
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Chemical Resistant
- Corrosion Resistant
- Cost Effective
- Good Weather Stability
- Non-Toxic
- Water Resistant
- Compatible Substrates and Surfaces
- Concrete
- Metal
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Additives | 1 - 4 | % |
| Flash Point | 105.0 | °F |
| Vehicle Solids | 50 - 60 | % |
| Volatile Vehicle | 40 - 50 | % |
| Weight per gallon | 7.6 | lbs. |
