LNP™ STAT-KON™ Compound DE003P

Chemical Family: Polycarbonate (PC)

LNP STAT-KON* DE003P is a compound based on Polycarbonate resin containing 15% Carbon Fiber. Added features of this material include: Electrically Conductive, Exceptional Processing.

Product families

Applications

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Industrial Automation

Electrical & Electronics — Parts & Components

Semiconductor Manufacturing

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics
Polycarbonates

Other characteristics

Brand: LNP™ STAT-KON™ Compound
Polymer Name: Polycarbonate (PC)
Fillers Included: Carbon Fiber
Flexural Modulus: 9920.0 - 9920.0 MPa
Additives Included: Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Electrical & Electronics
Industrial
Technology: Plastics
Material Features: ESD Protection
Electrically Conductive
Good Mold Release
Good Processability
High Flowability
High Stiffness
High Strength
Light Weight
Country Availability: Canada
China (Mainland)
Mexico
USA
Plastics and Elastomers End Uses: Electrical/Electronic Applications
Industrial Applications
Semiconductor Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

10 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break) ¹¹	121	MPa	ASTM D638
Tensile Stress (Break) ¹¹	110	MPa	ISO 527
Tensile Strain (Break) ¹¹	1.7	%	ASTM D638
Tensile Strain (Break) ¹¹	1.4	%	ISO 527
Tensile Modulus (at 50 mm/min) ¹¹	11160	MPa	ASTM D638
Flexural Stress ¹¹	193	MPa	ASTM D790
Flexural Stress ¹¹	184	MPa	ISO 178
Flexural Modulus ¹¹	9920	MPa	ASTM D790
Flexural Modulus ¹¹	9770	MPa	ISO 178
Tensile Modulus (at 1 mm/min) ¹¹	9880	MPa	ISO 527

Table 2 of 6

7 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.25	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.15	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.4	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.4	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.3 - 0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.32 - 0.41	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.4	%	ISO 62

Table 3 of 6

8 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	145	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	142	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000224	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000125	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000493	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000493	1/°C	ISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	145	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	142	°C	ISO 75/Af

Table 4 of 6

1 row

Characteristic	Value	Unit	Method
Surface Resistivity ¹¹	100 - 1000000	Ω	ASTM D257

Table 5 of 6

6 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	425	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	77	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	16	J	ASTM D3763
Multi-Axial Impact ¹¹	3	J	ISO 6603
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	33	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	7	kJ/m²	ISO 180/1A

Table 6 of 6