LNP™ LUBRICOMP™ Compound RN001S
- Chemical Family
- Polyamides
SABIC's Specialties Business LNP LUBRICOMP RN001S compound is based on Nylon 6/6 resin containing Molybdenum diSulfide (MoS2). Added features of this grade include: Wear Resistant, Heat Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
- Artificial Turf
- Consumer Electronics
- Displays
- Non-Food Consumer Packaging
- Applicators & Accessories
- Connectors
- Switches & Relays
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Molybdenum Disulfide
- Flexural Modulus
- 3440.0 - 3440.0 MPa
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Chemical Resistant
- Friction Resistant
- Heat Stabilized
- Improved Stick-Slip Response
- Lubricated
- No Added PFAS
- Wear Resistant
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Building Materials
- Bushings
- Cell Phones
- Commercial Appliance
- Computer Components
- Consumer Applications
- Containers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
19 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 92 | MPa | ISO 527 |
| Tensile Stress (Yield) ¹¹ | 84 | MPa | ASTM D638 |
| Tensile Stress (Yield) ¹¹ | 69 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹¹ | 3.5 | % | ISO 527 |
| Tensile Stress (Break) ¹¹ | 69 | MPa | ISO 527 |
| Tensile Stress (Break) ¹¹ | 84 | MPa | ASTM D638 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | 30 | % | ISO 527 |
| Tensile Strain (Yield) ¹¹ | 2.9 | % | ASTM D638 |
| Tensile Strain (Yield) ¹¹ | 2 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 3900 | MPa | ISO 527 |
| Tensile Strain (Break) ¹¹ | 3.8 | % | ASTM D638 |
| Tensile Strain (Break) ¹¹ | 42.2 | % | ISO 527 |
Table 2 of 6
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹ | 1.6 - 2 | % | SABIC method |
| Density ¹¹ | 1.16 | g/cm³ | ASTM D792 |
| Density ¹¹ | 1.16 | g/cm³ | ISO 1183 |
| Water Absorption (at 23°C, saturated) ¹¹ | 8.5 | % | ISO 62-1 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 1.01 | % | ISO 294 |
| Wear Factor Washer ¹¹ | 103 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF ¹¹ | 0.75 | — | ASTM D3702 Modified: Manual |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 1.03 | % | ISO 294 |
| Static COF ¹¹ | 0.55 | — | ASTM D3702 Modified: Manual |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.000078 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ | 0.000078 | 1/°C | ISO 11359-2 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 252 | °C | ISO 306 |
| Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹ | 230 | °C | ISO 75/Be |
| Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹ | 90 | °C | ISO 75/Ae |
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 231 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 76 | °C | ASTM D648 |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 223 | °C | ISO 75/Bf |
Table 4 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 4 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -20°C) ¹¹ | 3 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -40°C) ¹¹ | 2 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | min. 50 | kJ/m² | ISO 179/1eU |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 1110 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 26 | J/m | ASTM D256 |
| Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ | 2 | J | ASTM D3763 |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 53 | kJ/m² | ISO 180/1U |
Table 5 of 6
20 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 80 | °C |
| Drying Temperature ⁷ | 75 - 85 | °C |
| Drying Time ⁷ | 4 | Hrs |
| Drying Time ⁷ | 4 - 6 | Hrs |
| Maximum Moisture Content ⁷ | 0.15 - 0.25 | % |
| Maximum Moisture Content ⁷ | 0.2 | % |
| Melt Temperature ⁷ | 275 - 290 | °C |
| Melt Temperature ⁷ | 260 - 280 | °C |
| Front - Zone 3 Temperature ⁷ | 295 - 305 | °C |
| Front - Zone 3 Temperature ⁷ | 260 - 280 | °C |
| Nozzle Temperature ⁷ | 250 - 270 | °C |
| Middle - Zone 2 Temperature ⁷ | 260 - 280 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Compliant (94HB Flame Class Rating) ¹¹ | 1.6 | mm | UL 94 by SABIC-IP |
| Oxygen Index (LOI) ¹¹ | 26 | % | ISO 4589 |
