LNP™ LUBRICOMP™ Compound YL003
- Chemical Family
- Polyesters
LNP LUBRICOMP YL003 compound is based on Polyester Elastomer resin containing 15% PTFE. Added features of this grade include: Wear Resistant.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
- Artificial Turf
- Consumer Electronics
- Displays
- Non-Food Consumer Packaging
- Applicators & Accessories
- Connectors
- Switches & Relays
Product Families
- Thermoplastic Polyester Elastomers (TPE-E)
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Density
- 1270.0 - 1270.0 kg/m³
- End Uses
Appliances, Building Materials, Cell Phones, Commercial Appliance, Computer Components, Consumer Applications, Containers, Displays, Doors, Electrical Components, Electrical/Electronic Applications, Garden Equipment, Home Appliances, Lawn Equipment, Personal Accessories, Pool Covers, Sporting Goods, Tablets, Tarpaulins, Turf Applications, Windows
- Polymer Name
- Thermoplastic Polyester Elastomer
- Flexural Modulus
- 220.0 - 220.0 MPa
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Technology
- Elastomers
- Fillers Included
- PTFE
- Additives Included
- Lubricant (PTFE)
- Material Features
- Friction Resistant
- Unreinforced
- Wear Resistant
- Plastics and Elastomers End Uses
- Appliances
- Building Materials
- Cell Phones
- Commercial Appliance
- Computer Components
- Consumer Applications
- Containers
- Displays
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 24 | MPa | ISO 527 |
| Tensile Stress (Yield, Type I, 5 mm/min) ¹¹ | 43 | MPa | ASTM D638 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | 455 | % | ISO 527 |
| Tensile Strain (Yield, Type I, 5 mm/min) ¹¹ | 14.2 | % | ASTM D638 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 240 | MPa | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 180 | MPa | ISO 527 |
| Tensile Modulus (at 50 mm/min) ¹¹ | 230 | MPa | ASTM D638 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 230 | MPa | ASTM D790 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 12 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 230 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 220 | MPa | ISO 178 |
| Tensile Stress (Yield, 5 mm/min) ¹¹ | 14 | MPa | ISO 527 |
Table 2 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold Shrinkage (flow) ᵍ ¹¹ | 2.3 | % | SABIC method |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 1 - 3 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 1.5 - 2.5 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 1 - 3 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 1.5 - 2.5 | % | ISO 294 |
| Density ¹¹ | 1.28 | g/cm³ | ISO 1183 |
| Density ¹¹ | 1.27 | g/cm³ | ASTM D792 |
| Specific Gravity ¹¹ | 1.28 | — | ASTM D792 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.33 | % | ASTM D570 |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.47 | % | ISO 62 |
Table 3 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹ | 0.000172 | 1/°C | ASTM D696 |
| Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹ | 0.000188 | 1/°C | ASTM D696 |
Table 4 of 5
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 42 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 21 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 35 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 455 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 312 | J/m | ASTM D256 |
| Multi-Axial Impact ¹¹ | 24 | J | ISO 6603 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 25 | J | ASTM D3763 |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 80 | °C |
| Drying Time ⁷ | 4 | Hrs |
| Maximum Moisture Content ⁷ | 0.1 | % |
| Melt Temperature ⁷ | 215 - 240 | °C |
| Front - Zone 3 Temperature ⁷ | 225 - 240 | °C |
| Middle - Zone 2 Temperature ⁷ | 205 - 215 | °C |
| Rear - Zone 1 Temperature ⁷ | 180 - 195 | °C |
| Mold Temperature ⁷ | 25 - 55 | °C |
| Back Pressure ⁷ | 0.2 - 0.3 | MPa |
| Screw Speed ⁷ | 30 - 60 | rpm |
