To catalogue
LNP™ LUBRICOMP™ Compound ECL36
- Chemical Family
- Polyetherimide (PEI)Polyimides (PI)
SABIC's Specialties Business LNP LUBRICOMP ECL36 compound is based on Polyetherimide (PEI) resin containing 30% carbon fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Electrically Conductive.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
Building & Construction — Decorative Materials & Finishes
- Artificial Turf
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
- Displays
Printing & Packaging — Packaging
- Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
- Applicators & Accessories
Electrical & Electronics — Parts & Components
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Polymer Name
- Polyether Imide (PEI)
- Fillers Included
- Carbon Fiber, PTFE
- Carbon Fiber
- PTFE
- Flexural Modulus
- 19160.0 - 19160.0 MPa
- Additives Included
- Lubricant (PTFE)
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Technology
- Plastics
- Material Features
- ESD Protection
- Electrically Conductive
- Friction Resistant
- High Stiffness
- High Strength
- High Temperature Resistance
- Light Weight
- Very Good Heat Resistance
- Plastics and Elastomers End Uses
- Appliances
- Building Materials
- Cell Phones
- Commercial Appliance
- Computer Components
- Consumer Applications
- Containers
- Covers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
24 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, 5 mm/min) ¹¹ | 160 | MPa | ISO 527 |
| Tensile Stress (Break) ¹¹ | 179 | MPa | ASTM D638 |
| Tensile Stress (Break) ¹¹ | 160 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 1.2 | % | ISO 527 |
| Tensile Strain (Break) ¹¹ | 1.7 | % | ASTM D638 |
| Tensile Strain (Break) ¹¹ | 1.2 | % | ISO 527 |
| Flexural Stress ¹¹ | 230 | MPa | ASTM D790 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 21600 | MPa | ISO 527 |
| Flexural Modulus ¹¹ | 19160 | MPa | ASTM D790 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 256 | MPa | ISO 178 |
| Flexural Strain (Break, at 2 mm/min) ¹¹ | 1.6 | % | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 18500 | MPa | ISO 178 |
Table 2 of 6
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.48 | g/cm³ | ASTM D792 |
| Density ¹¹ | 1.49 | g/cm³ | ISO 1183 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.1 - 0.3 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.25 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.1 - 0.4 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.1 - 0.4 | % | ISO 294 |
| Wear Factor Washer ¹¹ | 31 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF ¹¹ | 0.39 | — | ASTM D3702 Modified: Manual |
| Static COF ¹¹ | 0.48 | — | ASTM D3702 Modified: Manual |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.32 | % | ISO 62-1 |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.21 | % | ISO 62 |
| Melt Volume Rate (at 345°C, 10.0 kg) ¹¹ | 4 - 6 | cm³/10 min | ISO 1133 |
Table 3 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 208 | °C | ASTM D648 |
| Specific Heat ¹¹ | 1890 | J/kg-K | ASTM E1269 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.000009 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ | 0.000028 | 1/°C | ISO 11359-2 |
| Thermal Conductivity ¹¹ | 0.33 | W/m-K | ASTM D5930 |
Table 4 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity ¹¹ | 10 - 1000000 | Ω | ASTM D257 |
Table 5 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, at 23°C) ¹¹ | 267 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 42 | J/m | ASTM D256 |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 18 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 5 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*3, at -40°C) ¹¹ | 7 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*4, at -40°C) ¹¹ | 25 | kJ/m² | ISO 180/1U |
Table 6 of 6
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 150 | °C |
| Drying Time ⁷ | 4 - 6 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 360 - 375 | °C |
| Rear - Zone 1 Temperature ⁷ | 355 - 365 | °C |
| Middle - Zone 2 Temperature ⁷ | 360 - 370 | °C |
| Front - Zone 3 Temperature ⁷ | 365 - 375 | °C |
| Nozzle Temperature ⁷ | 365 - 375 | °C |
| Mold Temperature ⁷ | 140 - 180 | °C |
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Screw Speed (Circumferential speed) ⁷ | 0.2 - 0.3 | m/s |
| Vent Depth ⁷ | 0.025 - 0.076 | mm |
