LNP™ LUBRICOMP™ Compound GX07409H
- Chemical Family
- Polysulfones
LNP LUBRICOMP GX07409H compound is based on Polysulfone (PSU) resin containing proprietary fillers. Added features of this grade include: Wear Resistant, Healthcare.
Product families
Applications
- Medical Devices & Assemblies
- Surgical Instruments & Trays
- Tubing & Fluids Handling
- Healthcare Packaging
- Industrial & Transport Packaging
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Polymer Name
- Polysulfone (PSU)
- Flexural Modulus
- 2640.0 - 2640.0 MPa
- Additives Included
- Lubricant (Unspecified), Proprietary
- Lubricant (Unspecified)
- Proprietary
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Healthcare & Pharma
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Friction Resistant
- High Temperature Resistance
- Lubricated
- Unreinforced
- Very Good Heat Resistance
- Wear Resistant
- Plastics and Elastomers End Uses
- Medical Devices
- Medical Packaging
- Medical/Healthcare Applications
- Pharmaceutical Packaging
- Surgical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, 5 mm/min) ¹¹ | 68 | MPa | ISO 527 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 48 | MPa | ISO 527 |
| Tensile Strain (Yield, 5 mm/min) ¹¹ | 5.8 | % | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 9.3 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 2520 | MPa | ISO 527 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 88 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 2640 | MPa | ISO 178 |
Table 2 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.31 | g/cm³ | ASTM D792 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.51 - 0.71 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.63 - 0.83 | % | ASTM D955 |
Table 3 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 167 | °C | ISO 75/Af |
Table 4 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 219 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 9 | kJ/m² | ISO 180/1A |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 120 - 150 | °C |
| Drying Time ⁷ | 4 | Hrs |
| Maximum Moisture Content ⁷ | 0.05 | % |
| Melt Temperature ⁷ | 360 - 370 | °C |
| Front - Zone 3 Temperature ⁷ | 350 - 360 | °C |
| Middle - Zone 2 Temperature ⁷ | 340 - 350 | °C |
| Rear - Zone 1 Temperature ⁷ | 325 - 340 | °C |
| Mold Temperature ⁷ | 150 | °C |
| Back Pressure ⁷ | 0.2 - 0.3 | MPa |
| Screw Speed ⁷ | 30 - 60 | rpm |
