LNP™ LUBRICOMP™ Compound RX05050

Chemical Family: Polyamides

SABIC's Specialties Business LNP LUBRICOMP RX05050 compound is based on Nylon 6/6 resin containing 10% PTFE, 10% aramid fiber and 10% carbon fiber. Added features of this grade include: Electrically Conductive, Wear Resistant.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Aftermarket Parts & Components

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ LUBRICOMP™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Aramid Fiber, Carbon Fiber, PTFE
Aramid Fiber
Carbon Fiber
PTFE
Flexural Modulus: 7200.0 - 7200.0 MPa
Additives Included: Lubricant (PTFE)
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Technology: Plastics
Material Features: Electrically Conductive
Wear Resistant
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Consumer Applications
Containers
Displays
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹¹	129	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3.3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	8700	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	187	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	7200	MPa	ISO 178

Table 2 of 6

2 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.5 - 0.9	%	SABIC method
Density ¹¹	1.27	g/cm³	ISO 1183

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.000024	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.000088	1/°C	ISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	258	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	238	°C	ISO 75/Af

Table 4 of 6

1 row

Characteristic	Value	Unit	Method
Surface Resistivity ¹¹	1000 - 100000	Ω	ASTM D257

Table 5 of 6