To catalogue
LNP™ LUBRICOMP™ Compound OFL36A
- Chemical Family
- Polyphenylene Sulfide (PPS)
SABIC's Specialties Business LNP LUBRICOMP OFL36A compound is based on Polyphenylene Sulfide (PPS) - branched resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Building & Construction — Decorative Materials & Finishes
- Artificial Turf
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
- Displays
Printing & Packaging — Packaging
- Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
- Applicators & Accessories
Electrical & Electronics — Parts & Components
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Fillers Included
- Glass Fiber, PTFE
- Glass Fiber
- PTFE
- Flexural Modulus
- 11030.0 - 11030.0 MPa
- Additives Included
- Lubricant (PTFE)
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Friction Resistant
- High Stiffness
- Low Coefficient of Friction
- Wear Resistant
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Building Materials
- Cell Phones
- Circuit Protection
- Commercial Appliance
- Computer Components
- Consumer Applications
- Containers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
27 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, 5 mm/min) ¹¹ | 124 | MPa | ISO 527 |
| Tensile Stress (Break) ¹¹ | 124 | MPa | ISO 527 |
| Tensile Stress (Break) ¹¹ | 144 | MPa | ASTM D638 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 1.4 | % | ISO 527 |
| Tensile Strain (Break) ¹¹ | 1.7 | % | ASTM D638 |
| Tensile Strain (Break) ¹¹ | 1.4 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 11100 | MPa | ISO 527 |
| Tensile Modulus (at 50 mm/min) ¹¹ | 12340 | MPa | ASTM D638 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 216 | MPa | ISO 178 |
| Flexural Stress ¹¹ | 197 | MPa | ISO 178 |
| Flexural Stress ¹¹ | 199 | MPa | ASTM D790 |
| Flexural Modulus ¹¹ | 11030 | MPa | ASTM D790 |
Table 2 of 7
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.69 | g/cm³ | ASTM D792 |
| Density ¹¹ | 1.69 | g/cm³ | ISO 1183 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.1 - 0.2 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.13 - 0.18 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.3 - 0.5 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.3 - 0.48 | % | ISO 294 |
| Wear Factor Washer ¹¹ | 33 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF ¹¹ | 0.44 | — | ASTM D3702 Modified: Manual |
| Static COF ¹¹ | 0.35 | — | ASTM D3702 Modified: Manual |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.04 | % | ISO 62 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.02 | % | ISO 62-1 |
| Melt Volume Rate (at 315°C, 5.0 kg) ¹¹ | 10 - 15 | cm³/10 min | ISO 1133 |
Table 3 of 7
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 268 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.0000234 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.0000236 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.0000486 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.0000501 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 266 | °C | ISO 75/Af |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 200 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 130 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 1.30E+02 | °C | UL 746B |
| Specific Heat ¹¹ | 1490 | J/kg-K | ASTM E1269 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.000024 | 1/°C | ISO 11359-2 |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 130 | °C | UL 746B |
Table 4 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index (UL, PLC) ᵖ ¹¹ | 4 | PLC Code | UL 746A |
| Hot Wire Ignition (PLC 0) ᵖ ¹¹ | min. 1.5 | mm | UL 746A |
| High Ampere Arc Ignition (PLC 0) ᵖ ¹¹ | min. 1.5 | mm | UL 746A |
| Hot Wire Ignition (PLC 3) ᵖ ¹¹ | min. 0.75 | mm | UL 746A |
| High Voltage Arc Track Rate (PLC) ᵖ ¹¹ | 4 | PLC Code | UL 746A |
| Arc Resistance (Tungsten, PLC) ᵖ ¹¹ | 7 | PLC Code | ASTM D495 |
| High Ampere Arc Ignition (PLC 2) ᵖ ¹¹ | min. 0.75 | mm | UL 746A |
Table 5 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, at 23°C) ¹¹ | 550 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 85 | J/m | ASTM D256 |
| Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ | 3 | J | ASTM D3763 |
| Multi-Axial Impact ¹¹ | 1 | J | ISO 6603 |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 26 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 7 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*3, at -40°C) ¹¹ | 8 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*4, at -40°C) ¹¹ | 31 | kJ/m² | ISO 180/1U |
Table 6 of 7
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 120 - 150 | °C |
| Drying Time ⁷ | 4 | Hrs |
| Melt Temperature ⁷ | 315 - 320 | °C |
| Front - Zone 3 Temperature ⁷ | 330 - 345 | °C |
| Middle - Zone 2 Temperature ⁷ | 320 - 330 | °C |
| Rear - Zone 1 Temperature ⁷ | 305 - 315 | °C |
| Mold Temperature ⁷ | 140 - 165 | °C |
| Back Pressure ⁷ | 0.2 - 0.3 | MPa |
| Screw Speed ⁷ | 30 - 60 | rpm |
Table 7 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 0.75 | mm | UL 94 |
| Glow Wire Ignitability Temperature (at 0.75 mm) ᵖ | 800 | °C | IEC 60695-2-13 |
| Glow Wire Flammability Index (at 0.75 mm) ᵖ | 960 | °C | IEC 60695-2-12 |
