LNP™ LUBRICOMP™ Compound EX10405H
- Chemical Family
- Polyetherimide (PEI)Polyimides (PI)
SABIC's Specialties Business LNP LUBRICOMP EX10405H compound is based on Polyetherimide (PEI) resin containing 30% carbon and proprietary lubricant.. Added features of this grade include: Wear Resistant, Healthcare.
Product families
- High Performance Thermoplastics
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Polymer Name
- Polyether Imide (PEI)
- Fillers Included
- Carbon Fiber
- Additives Included
- Lubricant (Unspecified), Proprietary
- Lubricant (Unspecified)
- Proprietary
- Processing Methods
- Injection Molding
- Note
⁷ Параметры литья под давлением упоминаются только в качестве общих рекомендаций. Они могут не применяться или требовать корректировки в конкретных ситуациях, таких как малые объемы впрыска, литье крупногабаритных деталей, литье тонкостенных деталей и газовое литье.. ¹¹ Информация, указанная в технических паспортах, должна использоваться только в качестве ориентировочной для целей выбора материала и не должна использоваться в качестве спецификации или для проектирования деталей или пресс-форм.
- Markets
- Healthcare & Pharma
- Printing & Packaging
- Features
FM: 17.3 GPa, improved "slip-stick", low friction.
- Technology
- Plastics
- Material Features
- High Temperature Resistance
- Improved Stick-Slip Response
- Low Friction
- Lubricated
- Metal Replacement
- Very Good Heat Resistance
- Wear Resistant
- Recommended Applications
- Surgical stapler internals
- Laparoscopic surgical tool internals
- Trocar latches
- Insulin pen dials, screw, and sleeve
- Inhaler dose counter buttons
- Fluid coupling quick disconnect
- Plastics and Elastomers End Uses
- Medical Devices
- Medical Packaging
- Medical/Healthcare Applications
- Pharmaceutical Packaging
- Surgical Devices
- Surgical Instruments
- Trocars
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
- Possible Applications in Thin-Wall Healthcare
- Metal replacement, Surgical tools.
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dynamic COF ¹¹ | 0.38 | — | ASTM D3702 Modified: Manual |
| Static COF ¹¹ | 0.44 | — | ASTM D3702 Modified: Manual |
| Wear Factor Washer ¹¹ | 22 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Specific Gravity ¹¹ | 1.4 | — | ASTM D792 |
Table 2 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 216 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 1.3 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 21540 | MPa | ASTM D638 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ | 283 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 17300 | MPa | ASTM D790 |
Table 3 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 213 | °C | ASTM D648 |
Table 4 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, at 23°C) ¹¹ | 476 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 56 | J/m | ASTM D256 |
Table 5 of 5
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 150 | °C |
| Drying Time ⁷ | 4 - 6 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 360 - 400 | °C |
| Rear - Zone 1 Temperature ⁷ | 360 - 380 | °C |
| Middle - Zone 2 Temperature ⁷ | 370 - 390 | °C |
| Front - Zone 3 Temperature ⁷ | 380 - 400 | °C |
| Nozzle Temperature ⁷ | 390 - 400 | °C |
| Mold Temperature ⁷ | 140 - 180 | °C |
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Screw Speed (Circumferential speed) ⁷ | 0.2 - 0.3 | m/s |
| Vent Depth ⁷ | 0.025 - 0.076 | mm |
