LNP™ LUBRICOMP™ Compound KFL23LH

Name: LNP™ LUBRICOMP™ Compound KFL23LH
Brand: LNP™ LUBRICOMP™ Compound

SABIC's Specialties Business LNP LUBRICOMP KFL23LH compound is based on Acetal (POM) Copolymer resin containing 15% glass fiber, 10% PTFE. Added features of this grade include: Wear Resistant, Low Extractable.

Product families

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Materials

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Healthcare & Pharma — Medical

Medical Devices & Assemblies
Surgical Instruments & Trays

Printing & Packaging — Packaging

Food & Beverage Packaging
Healthcare Packaging
Industrial & Transport Packaging
Non-Food Consumer Packaging

Product Families

Plastics — Engineering & Specialty Polymers

Polyacetals

Other characteristics

Brand: LNP™ LUBRICOMP™ Compound
Polymer Name: Polyacetal Copolymer (POM)
Fillers Included: Glass Fiber, PTFE
Glass Fiber
PTFE
Flexural Modulus: 5900.0 - 5900.0 MPa
Additives Included: Lubricant (PTFE)
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Industrial
Printing & Packaging
Technology: Plastics
Labeling Claims: Food Contact Acceptable
Material Features: Food Contact Acceptable
Friction Resistant
Low Extractables
Low Leachable
Wear Resistant
Plastics and Elastomers End Uses: Appliances
Building Materials
Consumer Applications
Electric Vehicles
Food Packaging
Food Preparation Equipment
Home Appliances
Hoses
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

15 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	78	MPa	ASTM D638
Tensile Stress (Break) ¹¹	90	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.8	%	ASTM D638
Tensile Strain (Break) ¹¹	2.7	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	6720	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	119	MPa	ASTM D790
Flexural Stress ¹¹	137	MPa	ASTM D790
Flexural Stress ¹¹	108	MPa	ISO 178
Flexural Modulus ¹¹	5750	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	107	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	5740	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	75	MPa	ISO 527

Table 2 of 5

6 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.58	g/cm³	ASTM D792
Specific Gravity ¹¹	1.58	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.21	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.9 - 2	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1 - 3	%	ASTM D955
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.34	%	ISO 62

Table 3 of 5

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	161	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	163	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	163	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	158	°C	ISO 75/Af

Table 4 of 5