LNP™ LUBRICOMP™ Compound CX94108

Chemical Family: Styrenics

LNP LUBRICOMP CX94108 compound is based on Polystyrene (PS) resin containing proprietary lubricant. Added features of this grade include: Wear Resistant.

Product families

Applications

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures
Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: LNP™ LUBRICOMP™ Compound
Polymer Name: Polystyrene (unspecified)
Additives Included: Lubricant (Unspecified), Proprietary
Lubricant (Unspecified)
Proprietary
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Industrial
Technology: Plastics
Material Features: Lubricated
Unreinforced
Wear Resistant
Plastics and Elastomers End Uses: Building Materials
Construction Applications
Faucet System Components
Fittings
Gears
Hoses
Housings
Pipes
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

6 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹¹	41	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.8	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	3600	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	72	MPa	ISO 178
Flexural Stress (Break, 2 mm/min) ¹¹	69	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	3500	MPa	ISO 178

Table 2 of 5

5 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (flow) ᵍ ¹¹	0.6 - 0.8	%	SABIC method
Wear Factor Washer ¹¹	365	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.6	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.71	—	ASTM D3702 Modified: Manual
Density ¹¹	1.08	g/cm³	ISO 1183

Table 3 of 5

2 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	86	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	80	°C	ISO 75/Af

Table 4 of 5