LNP™ LUBRICOMP™ Compound CG002XXN
- Chemical Family
- Styrenics
SABIC's Specialties Business LNP LUBRICOMP CG002XXN compound is based on Polystyrene (PS) resin containing graphite. Added features of this grade include: Wear Resistant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Glazing & Window Elements
- Interior Fixtures
- Pipes & Plumbing
- Equipment & Parts
Product Families
- Styrenics
Other characteristics
- Brand
- LNP™ LUBRICOMP™ Compound
- Polymer Name
- Polystyrene (unspecified)
- Melt Flow Index
- 20.0 - 20.0 g/10 min
- Fillers Included
- Graphite
- Additives Included
- Heat Stabilizer, Mold Release Agent
- Heat Stabilizer
- Mold Release Agent
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Industrial
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Friction Resistant
- Good Mold Release
- Heat Stabilized
- High Impact Performance
- No Added PFAS
- Wear Resistant
- Plastics and Elastomers End Uses
- Building Materials
- Construction Applications
- Faucet System Components
- Fittings
- Gears
- Hoses
- Housings
- Pipes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.03 - 0.05 | % | ISO 62 |
| Water Absorption (at 23°C, saturated) ¹¹ | 0.03 - 0.05 | % | ISO 62-1 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.04 | % | ASTM D570 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.05 | % | ASTM D570 |
| Mold Shrinkage (flow) ᵍ ¹¹ | 0.4 - 0.6 | % | SABIC method |
| Mold Shrinkage (xflow) ᵍ ¹¹ | 0.4 - 0.6 | % | SABIC method |
| Melt Volume Rate (at 230°C, 5.0 kg) ¹¹ | 21 | cm³/10 min | ISO 1133 |
| Melt Flow Rate (at 230°C, 5 kgf) ¹¹ | 20 | g/10 min | ASTM D1238 |
| Density ¹¹ | 1.1 | g/cm³ | ISO 1183 |
| Specific Gravity ¹¹ | 1.1 | — | ASTM D792 |
Table 2 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, 5 mm/min) ¹¹ | 45 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 2 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 4100 | MPa | ISO 527 |
| Flexural Stress (Break, 2 mm/min) ¹¹ | 72 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 4000 | MPa | ISO 178 |
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 47 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 2 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 4200 | MPa | ASTM D638 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ | 74 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 4000 | MPa | ASTM D790 |
Table 3 of 5
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat Softening Temperature (Rate B/50) ¹¹ | 99 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 99 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 100 | °C | ISO 306 |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 95 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 85 | °C | ISO 75/Af |
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 95 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 85 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.0000676 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.0000676 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ | 0.000078 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ | 0.000078 | 1/°C | ASTM E831 |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 2 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 8 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, at 23°C) ¹¹ | 13 | J/m | ASTM D256 |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 111 | J/m | ASTM D4812 |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 1.00E+00 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 9 | kJ/m² | ISO 179/1eU |
Table 5 of 5
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 80 | °C |
| Drying Time ⁷ | 4 - 6 | Hrs |
| Drying Time (Cumulative) ⁷ | 48 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Hopper Temperature ⁷ | 40 - 60 | °C |
| Melt Temperature ⁷ | 240 - 270 | °C |
| Rear - Zone 1 Temperature ⁷ | 220 - 230 | °C |
| Middle - Zone 2 Temperature ⁷ | 230 - 250 | °C |
| Front - Zone 3 Temperature ⁷ | 240 - 270 | °C |
| Nozzle Temperature ⁷ | 235 - 265 | °C |
| Mold Temperature ⁷ | 40 - 60 | °C |
| Back Pressure ⁷ | 0.2 - 0.3 | MPa |
