LNP™ LUBRICOMP™ Compound DL003

Chemical Family: Polycarbonate (PC)

LNP LUBRICOMP DL003 compound is based on Polycarbonate (PC) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Aftermarket Parts & Components

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Healthcare & Pharma — Medical

Medical Devices & Assemblies

Printing & Packaging — Packaging

Healthcare Packaging
Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics
Polycarbonates

Other characteristics

Brand: LNP™ LUBRICOMP™ Compound
Polymer Name: Polycarbonate (PC)
Fillers Included: PTFE
Flexural Modulus: 2100.0 - 2100.0 MPa
Additives Included: Lubricant (PTFE)
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
UL 94 V1
Technology: Plastics
Material Features: Friction Resistant
Unreinforced
Wear Resistant
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Consumer Applications
Containers
Displays
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

13 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.28	g/cm³	ISO 1183
Density ¹¹	1.28	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.05 - 0.2	%	ASTM D570
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	6.2	g/10 min	ASTM D1238
Water Absorption (at 23°C, 24hrs) ¹¹	0.2 - 0.3	%	ASTM D570
Water Absorption (at 23°C, 24hrs) ¹¹	0.2 - 0.3	%	ISO 62-1
Wear Factor Washer ¹¹	60	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.18	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.26	—	ASTM D3702 Modified: Manual
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.05 - 0.2	%	ISO 62
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	5.8	cm³/10 min	ISO 1133
Mold Shrinkage (flow) ᵍ ¹¹	0.7 - 0.9	%	SABIC method

Table 2 of 6

12 rows

Characteristic	Value	Unit	Method
Tensile Modulus (at 50 mm/min) ¹¹	2150	MPa	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	37.6	%	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	6.1	%	ASTM D638
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	51	MPa	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2190	MPa	ASTM D790
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	82	MPa	ASTM D790
Flexural Modulus (at 2 mm/min) ¹¹	2100	MPa	ISO 178
Flexural Strength (at 2 mm/min) ¹¹	81	MPa	ISO 178
Tensile Modulus (at 1 mm/min) ¹¹	2200	MPa	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	20	%	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	5.1	%	ISO 527
Tensile Stress (Yield, 50 mm/min) ¹¹	54	MPa	ISO 527

Table 3 of 6

8 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	127	°C	ASTM D648
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.000076	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.000098	1/°C	ISO 11359-2
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	128	°C	ISO 75/Af
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	138	°C	ISO 75/Bf
Vicat Softening Temperature (Rate B/50) ¹¹	144	°C	ASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹	144	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	144	°C	ISO 306

Table 4 of 6