LNP™ LUBRICOMP™ Compound 2X00858

Chemical Family: FluoropolymersPolyolefins

LNP LUBRICOMP 2X00858 compound is based on Fluorinated ethylene propylene (FEP) resin containing proprietary fillers. Added features of this grade include: Wear Resistant.

Product families

Applications

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Industrial Automation

Electrical & Electronics — Parts & Components

Semiconductor Manufacturing

Industrial — Power, Water & Utilities

Renewable Energy

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: LNP™ LUBRICOMP™ Compound
Polymer Name: Perfluoroethylene Propylene Copolymer (FEP)
Fillers Included: Glass Fiber, PTFE, Proprietary
Glass Fiber
PTFE
Proprietary
Flexural Modulus: 870.0 - 870.0 MPa
Additives Included: Mold Release Agent
Processing Methods: Injection Molding
Note: ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.. ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Electrical & Electronics
Industrial
Flame Rating: UL 94 V0
Technology: Plastics
Material Features: Dimensional Stability
Friction Resistant
Good Mold Release
Low Warpage
Wear Resistant
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Electrical/Electronic Applications
Energy Management
Industrial Applications
Semiconductor Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

14 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	14	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	12	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	5.5	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	9.3	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	1010	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	20	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	790	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	14	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	13	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	6.1	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	9.3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	930	MPa	ISO 527

Table 2 of 6

3 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	2.17	—	ASTM D792
Density ¹¹	2.17	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.01	%	ASTM D570

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	79	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	57	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	80	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	61	°C	ISO 75/Af

Table 4 of 6